alexlakustov

So, if I understand correct: I should config IP SLA manually on my devices and after add devices to VNQM?

Sorry, but i don't understand how are you doing it (May be, UDP, but it's big task, imho) NPM is software for monitoring network devise. For server monitoring Solarwinds has Application & Server Performance Manager.

Does Beta resolve all hostnames for direct connections? I have the same problem for UDT 2.0 in test environment. Could you provide me with download? I want to test it.

I need to have information about Response Time and %Packet Loss between locations, but I don't have routers there, only Cisco ASA 5510 or 5520. As I know Cisco ASA doesn't support SNMP Write - main requirement for VNQM, also, as I understand, ASA devices support only IP SLA ICMP Echo, not ICMP Path Jitter. So, can I solve…

I think, it's best-practice to have document where you describe you settings. Also I usually have only needed alerts, if I disable some I should write comment on it and edit name with something like 'Disabled'. After you disable all alerts for a short period you don't need write comment or edit name, after you will be able…

No, this information is in SW part of Brocade MIB, that I found. OK, thank you for your reply. I try to use Universal Device Pollers for collecting this data.

Do you use NPM for server monitoring? What server do you monitor?

Upload image is too long process

Orion WebGUI --> Settings --> Manage Nodes, find needed node, click "+", select interface and press "Edit properties", in the section "Bandwidth" select "Custom Bandwidth" and fill Income and Outcome Values. Be advised, I have both Orion NPM and NTA.

If so, you can use vbs (for example) script for sending alerts. It's supported HTML and other customizations.

Yes, my UDT server resolve both ip->hostname, hostname->ip. I see now some resolved hostnames (~10) for Indirect and Unknown types of connection. But nothing resolved for Direct Connection. I think I can't open ticket, because I use trial version for testing. And as I can see, it's typical problem for UDT

Hi Michail, So I can't use VNQM with Cisco ASA/PIX devices?

Also you can do it through Windows GUI for alert managing.

I have discovered only interfaces that in IF-MIB. If I do snmpwalk on MIBs for Brocade from www.snmplink.org/.../ I can see information about non-discovered interfaces.

And will start after reboot according to configured Service Startup Type. By default - automatic for all Orion services.

If you have only this web application on server You can add to monitoring switch interface (where connected server with this web application) and try to monitor utilization of this interface. Also you can try to use WireShark.

You can use Universal Device Poller and OID sysUpTime.0

What product you use for monitoring servers?

Brian, IMHO, there are two solutions: 1) Check access from NPM server to DB (table Nodes) 2) Manually update

We're running Orion NPM in one DC and monitor two other - no problem. But DB is placed in the same DC. There are hardware server, but it's old and one of future variant is visualization of PE. Don't worry, I think it isn't bad idea.

I have NTA installed with NPM and here I have bandwidth setting in Interface properties. May be, you have it too.

twildt, You need to configure Advanced Alert with "Property to Monitor": Interface. Then add condition for interface status. In Action create mails with different body.

Hello, If you have created view then you can only select predefined time periods: Last 24h, Last 7 Days, etc. If you have created report then you can use specified time period and change report objects.

1. Try to select in "Change Parser" Bandwidth when configure Variable (use "Insert Variable") 2. If it interface alert then You can use variable ${InterfaceDetailsURL}

hello. You can upgrade firmware to DD-WRT and enable SNMP in Administration->Services

Good day, I want to see on interface detail page extended FC interrface statistic, for example, FSOperStatusCause (1.3.6.1.4.1.9.9.289.1.1.2.1.7) with mapped string value and use it in Alert triggers. Is it possible to add it?

I think, you can update table Nodes in your DB, columns UnManaged and UnManageUntil. Just update UnManageUntil with your preferred date.

cdsouza, I think you can use SQL statement update for Interfaces table, Column InterfaceName.

I tested it and it works.

Update to 10.2.2. You can change message format.