Yann ✭✭✭✭✭

Comments

  • Further information about the Inet Address Type: http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&typeName=InetAddressType "A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress object is…
    in Displaying EIGRP Comment by Yann July 2009
  •  Can you check that the additional website and the main poller are in the same windows domain? it can explain this connectivity issue between the APM additional web console and the module engine located on the main poller. -Yann
    in APM with Additional Web Servers Comment by Yann May 2008
  • Could you post the SQL Query run by the Report? This will give more information about what it try to do. Open the Report in Report Writer. Click on Report > Show SQL. Select the SQL Tab. Thanks.
    in Custom Poller for Volume Utilization in Windows Server 2003 / HP Proliant Comment by Yann April 2009
  • Thanks for the details about RPR, I did not know that protocol at all...no sure if it has been mentionned during my Sonet/SDH courses :-). I think I found an interesting OID you could poll for each RPR interface on the ring which should tell you when the ring opens. IEEE-802DOT17-RPR-MIB:rprIfRingOperModes |…
    in Help recognizing my network Comment by Yann February 2009
  • Lee, Could you confirm the screen-length command works when you type it manually? Do you have a private mailing addres to send the trace option? You can either sanitize and attach to your post the session trace or open a case online: * To Open a Ticket: http://www.solarwinds.com/support/ticket Please reference this thread…
    in Downloaded Config Has Random Spacing & added Chars Comment by Yann February 2009
  • The manual is included in the zip archive when you download the Orion Management Pack. You can get it by logging in your customer portal http://support.solarwinds.com Then click on the Additional Components Links > Download Orion NPM Components > Orion Management Pack.
    in Error installing OMP for OpsManager 2007 Comment by Yann February 2009
  • If you confirm that other applications can collect the Syslog messages on the same server but that NCM Syslog Service fails, I would recommend you to open a support ticket to further investigate the issue. * To Open a Ticket: http://www.solarwinds.com/support/ticket Kiwi Syslog Generator is useful in such scenario to…
    in NCM Syslog not working Comment by Yann April 2009
  • No worries, If you are using the Node With Problems resource and you are logged in the webconsole with an admin account you should have an edit button on the top right of the resource, which redirects you to a new page where you can edit the resource properties. The filter should clean up the resource to only show your…
    in Node status is up but shows an alert if one or more interfaces are down Comment by Yann March 2009
  • No. EOC handles time zones differences for the Orion servers. Sorry if it was not clear, I just wanted to warn you to not be misleaded by time zones differences while checking clocks on servers.
    in Orion reports in EOC Comment by Yann February 2009
  • Hi SLXer, The report happened to be more complicated than we thought. We have a policy in support that states we do not support Advanced SQL Report so I could not spend further time on it nor escalate it to someone internally. Ryan asked some help to one of his colleague that has good SQL knowledge. In the last email we…
    in Report Writer Help (SQL) Comment by Yann May 2009
  • You might want to ask to Ciaran in the following thread to which software version he upgraded his FW as he solved the issue by doing so.
    in Nokia IPSO memory reporting Comment by Yann June 2009
  • You are right freemen, but then the results can be saved only in text files which means that you will not be able to e.g. run some policy reports. If there is no need of the advanced features then of course your method is faster to implement. Up to Jesper :-)
    in How to download and save routing tables Comment by Yann December 2008
  •  Could you try the following? 1) Uninstall the Integration Module provided with NCM. Start > Control Panel > Add/Remove Programs Select SolarWinds Orion Network Configuration Manager Plugins Change/Remove Select Remove and follow the wizard. 2) Repair the Orion installation Start > Control Panel > Add/Remove Programs…
    in Error trying to add node by web Comment by Yann November 2008
  • Hi all, NTA 3.5 has been released and polls automatically the CBQoS MIBs on the devices where it is enabled. http://www.solarwinds.com/products/orion/nta/network_performance_views.aspx If you have NTA, I would advise you to use this feature as it provides out of the box charts and reports in the web console.…
    in Tos Types of Service Report Comment by Yann July 2009
  • Hi, This thread might help you: Orion Error when setting NCM Credentials Thanks, Yann
    in NCM error on Orion Website Comment by Yann February 2009
  • How I can enable the apps for snmp monitoring? The documentation of the SNMP agent installed on your server should explain how to populate correctly the list of apps in this MIB. I have never worked on Novell servers so I am not sure how you could make it work. As per this doc from Novell:…
    in Missing Application form a Novell Zenworks Server Comment by Yann May 2009
  • Can I have your email address sir so that I could send you screenshots. You should open a ticket if you cannot share data here. * To Open a Ticket: http://www.solarwinds.com/support/ticket Do I have to configure anything on the exchange server for thesolarwinds to be able to monitor it as vmware, such as WMI or something?…
    in vmware monitoring Comment by Yann May 2009
  • And I've tried watching its Status value change using SNMP MIB Browser by refreshing the table, but never see it change from 3. But yet the TRAP always has the previous value of 4 (Offline) (See earlier entry in thread). The Trap might have a different definition. The details I found about the values are from the…
    in To use TRAP or use UnDP for Adv Alert - which is best? Comment by Yann March 2009
  • So you want to say that i have to uninstall orion version 8 first and then install orion 9? No I meant that once you have Orion upgraded to Orion 9, you do not need to keep the old licenses on your server Orion v7 & v8. However if you keep them installed it will not affect your Orion v9 installation. the problem is that…
    in Migrating From Orion NPM8 To Orion NPM 9 Comment by Yann November 2008
  • <EDIT> I've lost SNMP access to this device (the only one I'm polling with UnDP) </EDIT> Does that mean your issue is more or less solved till you get SNMP working back on this device? If not then I am not sure if your issue is related to the JobEngine.sdf or JobEngine35.sdf databases. Do you have any errors in the…
    in Universal Device Poller stops Comment by Yann February 2009
  • The above thread is about the Orion NetFlow Traffic Analyzer module which is a different product than the free RealTime NetFlow Analyzer. oriondemo.solarwinds.com/.../SummaryView.aspx and www.solarwinds.com/.../index.aspx Yann.
    in How to get Netflow data of specific IP address? Comment by Yann November 2008
  •  It appears that the webconsole tries to load the System.Core.dll file but cannot find it. This file belong to the .Net Framework 3.5 Could you ensure that this .Net Framework version is installed on your server? If it's installed, try to repair it.
    in Orion v9.1 upgrade issue Comment by Yann November 2008
  • Hi, I advise you to open a ticket so that I or another tech can work on this issue and exchange screenshots you do not want to publish on thwack. * To Open a Ticket: http://www.solarwinds.com/support/ticket Thanks Yann
    in Avg Disk Queue length Comment by Yann December 2008
  • The Poller Load Balancing Feature only allows you to move nodes from a Polling Engine to another one manually. It offers you the possibility to cleanly delete old polling engines from the database when they are no more used as well. What happen if I use the option of balance polling engine in Monitor Polling Engine? What…
    in Newbie Questions Comment by Yann February 2009
  • I am not sure why you cannot find it. Alternatively, instead of editing the Metabase.xml file, you can set this parameter permanently in IIS by following the below procedure: http://support.microsoft.com/kb/925764 Method 4: Increase the buffer limit You can increase the buffering limit if one of the following conditions is…
    in Overview web view is blank? Comment by Yann May 2009
  • Not sure what you meant by "ff" . If you follow the Admin guide to create a WMI Performance Counter, it will ask you a WQL query to poll a specific property in a WMI Class. The Propery I advise you to poll in the Win32_LogicalDisk class is the FreeSpace one. You can review the definition of that WMI class here:…
    in disk usage in apm Comment by Yann February 2009
  • The Username is not encrypted but the Password is. You can check by yourself in the APM_Credentials table in your database if you added some credentials. I do not know which encryption/decryption method is used for the password. R, Yann
    in WMI for Orion Comment by Yann February 2009
  • Does SolarWinds support NDE version 7? No. NetFlow v5 and v9 only.
    in Not getting all flows from cisco 6509. Comment by Yann June 2009
  • I've didn't know I had a MIB walker, where is this? You haven't yet :). On a linux box install the snmp package and the snmpwalk command should come with it or on windows someone took the time the provide the executable apart from the full Net-SNMP package:…
    in Show Cisco ASA VPN totals for users and site-to-site VPN's? Comment by Yann June 2009
  • Thank you for sharing the final report. I will review the query as I did not know how to summarize the results. Feel free to post it in the Content Exchange area of Thwack if you have 5 minutes, it will be easier for people to find it. Thanks, Yann
    in availability report Comment by Yann February 2009
Avatar