McGregorKLB

Comments

  • Did a lot of search.. Check this link! OID 1.3.6.1.2.1.1.3 = susUpTime
    in Device Uptime Comment by McGregorKLB May 2010
  • Hi Gle, Your right about that indeed, but in this case i don't want to be independent of the SNMP service being up for 10 hours, witch will mean that the server is up for 10 hours. If the SNMP services crashes, witch happens allot on some servers, the uptime will not be correct. It's a going on problem and i keep searching…
    in Device Uptime Comment by McGregorKLB May 2010
  • So.. I used MIB walk to see all the MIB's of the AP7920. I can't see 230Volts, only 120Volts. I'm guessing this is a fixed value, so the PDU don't actually messieurs the Voltage. Another thing.. On the website of APC i downloaded a MIB-database for this particular device, only question now is, where to put it, and if i put…
    in European power - 230Volt showing as 120Volts. Comment by McGregorKLB March 2010
  • Hi Jussty, Thank you for your answer, I will test this, because uptime is important for us and strangely on a few servers SNMP keeps crashing. The most servers we are running are Dell servers, so I searched Dell in combination whit SNMP, and found someone that told me that "Dell Open Manage" is cousin this problem.. but we…
    in Device Uptime Comment by McGregorKLB May 2010
  • It's a long time since the last post on this topic.. But i have the same problem.. Can you provide me whit some info that SolarWinds has given you? I do receive an email but whit the login page that says that i cant login. (Login failure. Username and/or Password incorrect. ) But i use my credentials that i would normaly…
    in Report Scheduler problem Comment by McGregorKLB May 2010
  • To ecornwell, Yes i have a web interface on this device, and it shows only AMP's. At this moment it shows : 1.7 AMP's, so 230V * 1.7AMP = 391 Watt. The reading only shows 195 Watt.. so that means that the separate OID for Volt/Ampere also uses the 120Volt value. (1.3.6.1.4.1.318.1.1.12.1.18) So thats telling me that it can…
    in European power - 230Volt showing as 120Volts. Comment by McGregorKLB March 2010
  • This method is checking if the SNMP service is running and since when. We have frequent errors on the SNMP-Service in Windows, so when you start the service after an error, NPM sees it as the node is rebooted, so the uptime is no longer correct. it shows 0 hours, and the server is up for 66days. There must be a counter in…
    in Device Uptime Comment by McGregorKLB May 2010
  • I just updated the device to Firmware v3.7 but still the same reading.. I will check if this is a known issue.. I will report back when i have something. Thanks!
    in European power - 230Volt showing as 120Volts. Comment by McGregorKLB March 2010
  • Hi Battinski, I don't use VLAN's and the DHCP is automatically given by the router. All the computers are on the same subnet so every ip is 192.168.0/24 Its no domain but a workgroup if that matters.. guess not.. I did a MIB walk to check all the available MIB's, there were a lot of MIB's available so have to look again…
    in Two Ip's under one note. Comment by McGregorKLB March 2010
  • Hi guys, I see this is an old post but I still have a question about SNMP with multiple NIC's. I have 1 Server with 5NIC's all running static IP addressees. Adding the system to Orion, I needed to figure out witch IP address would respond on the SNMP Community String. Once added to the Orion database the machine showed all…
    in Multiple NIC and SNMP issues? Comment by McGregorKLB July 2012
  • Hello Nellson, Did you find your answer yet ? I'm starting to put all the APC - AP7920's in Orion NPM, so at this moment i'm searching for info.. Do you have info for me, or sum interesting links to read. Thank you! Gregor.
    in Monitoring the APC AP7932/AP7941 amperage. Comment by McGregorKLB March 2010
  • If you use Firefox press F11.. this will help a bit.. but is not the solution.
    in NPM 10 new page layout can it be changed Comment by McGregorKLB May 2010
Avatar