Impaler

So based on this thread and the responses, the new Meraki monitoring feature currently does not work, correct?

...just to pile on here, we deployed the leaves/spines this weekend and plan on going full prod Q3.Native Orion support would be huge.

Can MS SQL 2016 developer edition be used?

We have just deployed CyberArk into prod & now I can no longer back up all/any of our Cisco node configs via NCM. Any suggestions, ideas, successes, links etc. related to fixing this would be greatly appreciated.

We will be deploying ACI this July, and SDWAN Q1 next year. According to Cisco, ACI is being rapidly deployed at breakneck speed now that it's surpassed the "bleeding edge" and had some time to mature. Hopefully full native support for these won't be as late as SIP support, which we've been waiting for for over a year now.…

ok so now I can't get any results from a scan. I have it configured with all of the same SNMP credentials as NPM and everything else. " 4/24/2009 12:46 PMADMIN The scanning of 'xx.xxx.x.x /24' started at 4/24/2009 12:45:49 PM has finished successfully. 0 IP(s) have been found. The scan duration was '0.5' minutes.

Working in Firefox fore me. Not IE.....

OK, I think I got this figured out: I believe I can do what I need to do by selecting "Custom" in "Define Paths". I haven't tried this yet but it looks like this will work....

I would say just reverse the colors to keep it consistent. Also, the packet loss gauge scale needs to be adjusted as well. Currently it goes from 0-100%. Even a 1% loss is unacceptable in the VoIP realm. (I have the warning threshold set at .5%.) At 1-5%, you can't really see that the needle has moved. So it would be great…

Yes, each serial multilink in each router has it's own separate address representing the different carriers, plus the ethernet interfaces. If I'm understanding this correctly, I'll need to create a separate node in NPM for each carrier interface on each router? So in effect, each physical router will have several instances…

So through process of elimination, as suggested by lchance, I determined that the root cause of the error is the "All Triggered Alerts" resource - when I remove that from the page all is good. Unfortunately I need to have that resource on the page though. I'm guessing that it may be some HTML code level thing, but I'm not…

I'm not really clear on how this command would resolve this issue. Could you explain a bit? Maybe share your complete netflow config?

wow, ok - that worked. Guess there's something wonky on my summary screen like you said. Now at least I can start troubleshooting. Thanks for your help!!!!!!!!!!!!!

Thanks Chris - At least now I know I'm not loosing it... Is there a temporary workaround for this? I need to create a RO VoIP summary page displaying that page exclusively for our voice people. No matter how I go about it, it seems to only display the IP SLA summary.....

Right - I figured that. I have ~10 ops running on each router at each location to cover the whole mesh and all of the carriers. Throughout the day, many of them occasionally pop below the threshold, which really has no impact on the average MOS for that site, so there's no need to ever be alerted on any one individual op.…

I also tried unmanaging the offending switch ports to see if the alerts would go away. - negative.

oops! Now I have another question - since I have multiple multilink interfaces on each router, how can I create a separate node within each router for each interface? i.e., if I create a node A using carrier #1's address, how can I create another node (which is actually physically on the same node) representing carrier…

I still have not resolved this issue and the ticket remains open. no one in support has been able to resolve or explain, and I have requested several times that this be escalated but I'm getting no response. If there's a mod out there that could please bump this ticket we'd really appreciate it.

This is ridiculous and totally unacceptable. I don't have the time, nor should I ever have to do a complete reinstall, much less to this periodically every time the scans seize. I've been periodically doing the .msi uninstall/reinstall routine when necessary, but I'm having to do this more and more frequently. Please fix…

">Bahlkris- are you running 10.4.1 or 10.4.2?

I'm logged in as a full blown admin with no restrictions. I'm able to ack/clear other alerts, just not these for some reason. The groups that the interfaces are in shows "Group does not have any problems." The interfaces in question in the group member list show "up". They do not show up in adv. alert mgr. under active…

I case anyone is interested, support suggested I just run the Config Wizard and select "Database", which fixed it. 

OK I did indeed have the ethernet address for each location in there. I guess when you select a node to be included it uses whatever you have configured for it in NPM. thanks Chris!

I'm at 10.1.3 - there's a bug fix for this in 10.2?

netlogix - Thanks. That's what I was looking for.

Oh wow I never noticed that!!! Yes, that's just what I needed. Thanks rayray!!!!!

I second that. This would be very useful indeed...

So you had to hard set the bandwidth on even the interfaces that were discovered correctly? Did you use 1544000 for the custom bandwidth amount for your T-1s?

That fixed it. Thanks for the help!

Boy, I'd be willing to start that process of elimination if I could get there, but this pops as soon as I log in - I can't access anything.