Cosmin

I have the same problem with SolarWinds Orion Job Scheduler service: "The SolarWinds Job Scheduler service terminated unexpectedly. It has done this 20 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service." Related to this error, I have a .NET Framework 2.0 error: "EventType…

Hi everyone, I've recently discovered (by chance) the same problem as vinod both on Orion NPM v9.1 SP5 and Orion NPM v9.5.1 (see the attached pictures, which I think you'll find them very interesting). For example, in Orion v9.5.1, I discoverd on a 64Kbps a transmitted traffic of 19 Mbps...and the Percent Utilization Chart…

Hi Bshopp, I know the feature of running scripts for alerts/syslogs/traps...but what I don't know is exactly how can I run an external script for a trap for example...and inside that script to use the dynamic variables...for example...if interface X of node Y goes down, how could I run the external program using variables…

Definitely that I will confront the ISP with the reports from Orion...but I just wanted to know if Orion has this option of setting the size of ICMP packets and set the number of ICMP packets sent per poll (beside the interval of polling which can be done in Orion) so that I he a greater control on the status polling.…

Hi Craig, I may have found a way to get the availability of the ICMP Operation...but I need to know exactly the behaviour of the IP SLA Manager. I've looked in the DB for the ICMP Echo operation and found the following data collected (for one ICMP operation during one month where MinRespTime = 0). From what I found in the…

Hi bshopp, I've looked over that document...but I didn't mentioned that the mnagement would like to integrate with BMC Patrol not by sending email alerts, but by running external scripts or by SNMP. Thanks, Cosmin

Hi Stevecera, I'm using Orion v9.1 SP5 and last night I got the same problems with Orion as you. Orion started firing a lot of incorrect alarms about unknown staus of interfaces and nodes...and when I've checked Event Viewer I found out that there are some issues with the connections to the database, like "2010-05-26…

Hi, I've recently upgraded Orion NPM to v10.0 SP1 and from that time, I'm getting a lot of errors as the one described by Jaroslaw Ladyga(see the description below). And the thing is that I run only Orion NPM, NCM and IP SLA Manager and not APM. Solarwinds Event monitor gives lot of warnings of Syslog type 1024…

Hi Ecklerwr1, I was asking thi because I'm using the ICMP polling status for SLA reports (for availability, packet loss, response) for confrunting with the ISP offer/demands. And I thought that there could be a way of configuring a set of parameters for ICMP packets to show the ISP what was the exactly rate of ICMP packet…

Not for the moment, but we're taking into consideration this option. But I need to know exactly what could be the cause to this issue...as I need to explain to the administration what's happening within Orion and to find out a resolution for it. Thanks, Cosmin

Hi Jason, I've looked over the built-in ICMP ECHO reports...and the only thing that could helped me was the table in which are collected the IP SLA operations data. The built-in report only shows the min, max and avg response time to an ICMP ECHO operation. Best regards, Cosmin

Hi morgolis, I have the following syslogs I would like to retain in DB (all of them strictly related to ACLs): "54540: Buc: access-list logging rate-limited or missed 3 packets" "2277: Buc: list INPUT-WAN denied icmp 172.zz.z.z -> 172.tt.tt.ttt (3/13), 1 packet" "268885: Buc: list OUTPUT-WAN denied tcp 10.xx.x.xxx(1197) ->…

Hi, I encountered the same problem (NetPerfMon service stopped by itself) so I verified the space on the SQL server and indeed there was no space left. The question that I have is as follows : - the logical drive where my Orion DB is located has arround 200 GB, while the Orion DB itself has arround 37 GB (so basically…

Hi bshopp, I'm running Orion NPM v9.5.1. Best regards, Cosmin

Hi Smith, Our Manager would like to integrate Orion NPM with Patrol Event Manager (PEM) and I don't know how to to that...could you be kind and give me more information on how did you integrate it?What do we need ? Thanks, Cosmin

Thanks for your prompt answer.

I have a problem related to SolarWinds Orion Job Scheduler service too: "The SolarWinds Job Scheduler service terminated unexpectedly. It has done this 20 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service."Related to this error, I have a .NET Framework 2.0 error: "EventType…

Hi, I have the same problem...and started to occur more frequently. I've rerun Configuration Wizard and also tried Arnie's solution from "" and still no luck. The only reliable workaround I have for the moment is to unload COM + Application Services from Orion Service Manager (which takes only a few seconds). But is there…

Hello SW staff and SW users, I've just installed the latest version of Orion NPM v9.5 with SP3 and since then I got the following error on the Syslog Summary frame : The "Syslog Summary " resource threw an exception.. The communication object,…

Hi, I have the exact problem, and I'm using Orion NPM v8.5.1 with SP3. I've opend lots of tickets to SolarWinds support, but they couldn't figure out a reliable solution for it. As a workaround, I'm unloading COM + application Dor SolarWinds Orion NPM (from Orion Service Manager) every time the problem occur (in this way…

Hello Arnie, I've tried the solution you suggested, but the problem still appeared (after a few days). As a workaround I use the solution of unloading COM+ Application Services (from Orion Service Manager), which takes only a couple of seconds, but the problem for this solution is that it solves the problem temporary (for…