The most recent content from our members.
I have a simple configuration change template to set the SNMP location & contact of Juniper devices. I created a new Juniper Device template because the default one wasn't working either. Here is my configuration template. /* .CHANGE_TEMPLATE_DESCRIPTION This change template configures SNMP base options on JunOS devices.…
Can you include the Juniper JunOS poller as a default for all Juniper devices in Solarwinds NPM and a default reports to show all versiuon of JunOS like the Cisco IOS reports. There is a guide to manually add this on your website, link below, but I think it should be part of the default polling. The only difference from…
One of our Juniper EX9214 had an Chassis error on FPC7. We didnt get any kind of warning from Solarwinds that there was an error on the box. I looked through the resource list and am not sure how to make sure we are getting the errors that happen on the Chassis. Anyone know how to fix this issue? Currently running Orion…
JUNOS EOS/EOL data: Parse the sysDesr for the device: e.g.: Juniper Networks, Inc. ex3200-48t Ethernet Switch, kernel JUNOS 12.3R11.2, Build date: 2015-09-24 13:01:13 UTC Copyright (c) 1996-2015 Juniper Networks, Inc. extract the version number (12.3R11.2) extract the specific device type ( ex3200-48t) Check firmware…
Hi I'm trying to get NCM to deploy new routing instances to some Juniper kit. I've managed to get a script together that seems to output what looks like readable config however when it tried to execute it on the device the result is different. Is there an issue with NCM deploying routing instances or have I missed…
Custom Juniper MX Series Poller
Custom Juniper EX Series Poller
There are certain checks we'd like to make against our Juniper gear that only work in Operational mode. For non-juniper people, that means the information is not stored in the configuration. For instance, we want to run the following check to make sure the OS on both the primary and backup partitions is the same: show…
I am obviously new to any kind of programming or scripting and I am beating my head against a wall trying to figure this out. Below is a config change template I've created to create a new Loopback interface on a Juniper SRX router using the 3rd octet as the 4th octet of the new interface. However, I am getting an error…
It looks like you're new here. Sign in or register to get started.