The most recent content from our members.
I have a UNDP chart for our PDUs that shows the Active Power for the PDUs over time. Last night there was an erroneous snmp data poll that blew the table way out of range and now I cannot even see the chart lines because it went from a normal range of 0-2k to a ridiculous 0-600k Is there a way to reset this historical data…
We are using Server Technology Inc. Switched Pro 2 PDUs. We are trying to have Solar Winds poll information regarding the power consumption for PDUs by plug or by timely intervals. If there's also a way to control that, that;d be great as well. I have checked out enabling EnergyWise when trying to manage the PDU nodes, but…
Hi all, Based on follow up related to this thread: https://thwack.solarwinds.com/t5/NPM-Discussions/Solarwinds-and-Tripplite-UPS/m-p/141406 I made some UnDPs for Single Phase Tripp Lite UPSes and PDUs with "LX" network management cards (e.g. the WEBCARDLX). These may serve as a good starting point if you're looking to do…
I have ~150 PDUs in the data center and I wish to produce an output that will list each PDU by name in one column and in subsequent columns I need MIN, MAX, AVG for Temperature, Humidity, Amps (x3 by phase), Voltage, (x3 by phase) Watts (x3 by phase) over the previous 7 days with two final columns providing kWh and the…
I have some Emerson PDUs that I need to monitor and although I see the Emerson MIB listed when I am setting up a UDP, I get "The OID is not supported" when selecting anything other than the parent called Emerson. I have the APC PDUs setup but am struggling with Emerson and Panduit. Any advice? I am trying to replace…
Hi Thwackers, Im able to see many NCM device template for various vendors (Cisco, HP, Aruba, 3CMOM etc) but unable to see any for Raritan PDU (Power suuply). Can anyone suggest what would be the SystemOID, command name and value? Thanks
Good morning, I'm trying to use a UnDP to get the amps on each bank of my APC PDU's (model 8841), and for some reason those OID's seem to have dropped out of the device. They used to work, but now I'm getting the following error: SNMP monitor execution error. No such name error. Check whether OID is valid. I tried it again…
Created for Eaton EPDU
Created for APC rPDU
Good afternoon, I recently set up a few UnDP's to monitor load on a PDU. I've got a poller for bank 1, one for bank 2, and one for bank 3. Then I've got a transformation that adds all three of those together to show the total load. I'm trying to publish that as a chart to the Node Details page, but for some reason every…
It looks like you're new here. Sign in or register to get started.