The most recent content from our members.
Hi, I'm trying to add a node implementing a custom SNMP MIB to NPM and it appears to be failing. If I use the SNMPWalk application (installed I believe as part of NPM) it is able to read the objects from the custom MIB on the node; looking at Wireshark it appears to be doing this by performing a set of 'getBulkRequest'…
We could use your help! In order to continue building great device support for a variety of vendors, we need some additional information. I'd like to ask anyone who has one of these devices to use the SolarWinds SNMP Walk Tool to collect the MIB database and SNMP walk data, and then send me the results. An SNMP walk is a…
We have dozens of Juniper EX2300 switches and whitch are not compatible with UDT3.3 to retrieve VLAN information of ELS Juniper EX Series Visually, the issue is that UDT shows incorrect numbers in the column VLAN which are apparently retreived from this OID jnxL2aldVlanFdbId.2 = 131072 jnxL2aldVlanFdbId.3 = 196608…
Hi, has anyone encountered an SNMP timeout during a MIB walk and if so how could you extend the SNMP timeout period to prevent this from happening, I am trying to find a certain OID and reckon it's further down the walk but my walk is dying before it gets there...
Greeting, We have a concern about reading historical traffic on a managed interface, SNMP reads the interface traffic data every two minutes but any event happens between SNMP reads are not stored in the next SNMP read, so we are not to able to monitor if the traffic reached our threshold and got back unless it stays till…
Hi I currently have NetFlow and CBQOS monitoring configured on L3 devices which is great and provides great insight into QoS performance. What I don't have visibility of is how the L2 QoS is performing at the LAN access layer. Currently, the only way is to log onto a switch and run "Switch#sh mls qos int gi1/0/1…
I'm running into problems with traps we receive from a Lenovo xClarity management server. Lenovo has already sent us the latest MIB file, I've already opened a support case with Solarwinds, they've already added it to the latest MIB Database Build and I've already replaced the MIB file with the new one on both our pollers.…
I have a UDP created for the OID 1.3.6.1.4.1.9.9.91.1.1.1.1.4 (CISCO-ENTITY-SENSOR-MIB:entSensorValue) The problem is that the values reported by the OID are not easily correlated to the values presented in NPM NMP Values (UDP)snmpwalk values 375375 Trend33003300 Trend3737 Trend50005000 Trend1190111901 Trend12001200…
To find particular values I'd like to monitor on a device what I'd usually do is perform a MIB walk using the MIB walk tool in NPM. However the output from a MIB walk is usually difficult to read or make sense of because the OID's names are never particularly intuitive or readable so what I end up doing is doing is - say…
Since we have the ability to walk MIBS add SNMPSET functionality.
It looks like you're new here. Sign in or register to get started.