The most recent content from our members.
How can I change order of columns on Tabular Universal Device Poller table? for example I have table as below and I'd like to set VSNAME as a first column -- label of the row, then VSPROTOCOL, VSSTATE, and later measurements for Connections, BytesIn, etc. VSNAME -…
When using tabular pollers, if some pollers return more values than others then all Row ID's show. This gives un needed values. Mainly I want only the RowID's that are multiples of 1K. This pulled the line card/module information. Rather than have to open each node and edit each table, to remove all other RowID's (other…
Does anyone have some insight into keeping your Row ID's listed as the full integer? As it is, Polling long Tables ends up with long integer #'s for the Row ID's. The system likes to turn these into scientific notation. Translating these back to exact row ID's is not always accurate. How can you get the Row ID to show as…
Anyone know how to check only specific values(RowID's) for table pollers; on a group, or MASS of Nodes? Either after adding, or when adding them... there is a need to choose RowID's of each 1000 (for module information)... I would rather not have to open each node details page and edit each table poller. Anyone know of a…
Is there a way to have a universal device poller chart, with multiple tabular UnDPs? I'm polling number of connections, bytes in and bytes out for each vip from ours F5 balancers, all values are taken from F5-BIGIP-LOCAL-MIB table, so they all have the same index and can be correlated. Unfortunately I'm not able to…
Hi, hardware monitoring with alert triggering is mandatory for every network, I am playing around with the typical topics - fans, power supplies, temperature, ... so here you always come across tabular SNMP data. GUI presentation works fine in the meantime, unfortunately I'm not able to find a state of the art UnDP…
I strongly suspect this is going to turn into a feature request very quickly, because I've been searching, but been unable to find it. Is there such a thing as the Node Tabular Universal Device Poller, only for groups? Specifically what I'd like to see is info on the DHCP scopes of my 140+ DHCP servers all in one resource,…
I have added custom pollers to pull in CDP Neighdor infomation into NPM. I am trying to use the Tabular Universal Device Poller to create a chart. I'm able to create the table I want with one Tabular UnDP, but for each custom poller I also get another Tabular UnDP with just that one poller. If I delete that Tabular UnDP I…
I have added, edited, and deleted several UnDPs for a particular node. I noticed that a handful of UnDPs still display the "Tabular Universal Device Poller" entries on the Node Details page even though the UnDPs are deleted. I even unassigned all UnDPs from this particular node and I have a handful of Tabular Universal…
I am wondering if anyone can help to suggest either a resolution or work-around for an issue that I am having. I have a universal device poller set up to get a MIB table for monitoring ISAKMP Peers and uptime on a Cisco ASA. I am sucessfully able to pull the data, and can even get it to display in a reasonable fashion with…
It looks like you're new here. Sign in or register to get started.