The most recent content from our members.
Hi, a revised firmware upgrade template for Cisco Catalyst 9000 series switches would be a great help, as the available template does not address the "install" mode of the newer hardware.
On switches which run on the Supervisor 8 (WS-X45-SUP8-E), interfaces are showing up multiple times. There is a thread which discusses how to manually exclude these interfaces from the polling, but it would be better to have a "checkbox" or something that offers the ability to "exclude" all Controlled/Uncontrolled…
At least not on our infrastructure I just get nothing in List of All VLANs resource under NPM Summary, or anywhere else for that matter. Site is all Cisco switches (3750, 2960 for the L2 stuff with a mixture of VSS, N7K for the L3 core) and I've checked as many as I can: they all have the option to poll VLAN checked in…
All - As suggested by Jiri, here is my NCM Config Change Template for upgrading Cisco Catalyst switch IOS versions. Note that this script was written to upgrade switches by type; i.e. run once to upgrade a batch of 2960 switches, run a second time to upgrade a batch of 3750 switches. Mixing switch types in the same…
UnDP and reports for line card status of Cisco Catalyst 4500, 6500, 7600 chassis. The UnDP file contains 2 pollers: cefcModuleOperStatus for 4500 chassis, and moduleStatus for 6500 and 7600 chassis. The included reports will produce a listing of the switches and line cards that have a status other than "ok". Output is…
All - Note that this script was written to upgrade switches by type; i.e. run once to upgrade a batch of 2960 switches, run a second time to upgrade a batch of 3750 switches. Mixing switch types in the same iteration will make your network VERY unhappy......... The following caveats apply: Switch must be a relatively…
This change template configures NetFlow on Cisco 4000 Catalyst.
Turn on netflow for the Catalyst router: ip flow-export source (interface name) ip flow-export version 5 ip flow-export destination (netflow collector IP) (port exported flows go to) ip flow ingress layer2-switched vlan (any needed vlans) ip flow-cache timeout active 1 Then configure NetFlow for all the switched traffic:…
Hi - We have 100's of 3750 switches of differing models so I'm having to do most of this manually because of the way it finds all of them as Catalyst 37xx Stack which covers many models with different EoL dates, this has been mentioned already in other threads as has the stack issue with different models stacked together…
flow record NTArec description IPv4 monitor match ipv4 tos match ipv4 protocol match ipv4 source address match ipv4 destination address match transport source-port match transport destination-port match interface input collect routing source as collect routing destination as collect routing source as peer collect routing…
It looks like you're new here. Sign in or register to get started.