The most recent content from our members.
I want to draw attention to frequency/timeout. One thing would be nice if we could have a dropdown for minutes/hours/days to make things easier, but another would be if we could schedule this. Say, for example run this at 11AM every day or 11PM every night? Maybe with a menu similar to report scheduling or alert scheduling.
Right now this information is updated nightly. It would be great if we could update the polling frequency for this to update the information more frequently. How often is user mailbox information collected by AppInsight for Exchange - SolarWinds Worldwide, LLC. Help and Support
Hi All, Sorry for the potentially dumb question, I'm quite new to vnqm and I couldn't find an info about this. I have a new installation in vnqm, and our network guys defined 240 ipsla udp jitter operations. Some set to 180 seconds polling interval, other to 60, since this greatly impact the performances of our db, I would…
Cisco IP SLA polling should be aware of and adjust behavior based upon the implementation of the Cisco IP SLA History options that are available. If I configure my Cisco device to retain IP SLA test results for some history that extends beyond the default SNMP polling interval of NPM, then NPM should collect those IP SLA…
Have you ever tried to edit multiple nodes and change a custom property? Works very nicely, doesn't it? You can put a check box next to the custom value you want changed and change ONLY that value. No other value is updated. Try that with a polling section. It doesn't work the same for polling as it is a SINGLE check box…
Hello Everyone, Currently, we have our Statistics Collection interval set to 15 minutes. This was set when we initially went live at the end of last year, though I am not sure how this time frame was determined. With some recent issues, I have determined that we might benefit from having our interval set to a shorter…
Hi, I am interested in knowing how much CPU resource is being used by the Windows Event Log Monitor for example when it is set up to check the log every 5 seconds or 2 seconds. I know there is a way to view the overall resource consumption for a specific node, but I am just interested in how much CPU does the concrete task…
I'm tracking a packet loss and latency issue to three nodes that are set to Status Only polling. After reading through the various Thwack threads, it seems like polling is used primarily to determine availability statistics by sending a single ICMP packet and only following up if there's a failure. I was hoping more for a…
Hi all, Has anyone had any experience monitoring devices on the other end of a 3G/4G/NextG/Wireless link? Our system is currently polling approximately 1700 devices but there are several sites on the other end of mobile networks. Sometimes the towers at these remote sites can become congested and the devices are marked as…
The recent change of Orion to automatically tune the polling engine is a nice feature, but it needs to be fixed! Per the notes, this is set based on an "internal" calculation from SolarWinds. The problem is, there is no option to override it. I have beefy boxes, that sit nearly idle, but the software is scaling my polling…
It looks like you're new here. Sign in or register to get started.