The most recent content from our members.
Issue Description It was escalated by customer that they faced every day ADSL ports in failed state of ADLE boards. The network connectivity is like this, MDF>>MA5616>>SDH System>>BRAS Version of MA5616 is as follows, MA5616V800R307C01 Service Board Name : H835ADLE Alarm Information NULL Handling Process 1- Service boards…
For ADSL and Internet links the RX and TX bandwidth is different. On the ATM interface on the Cisco router there is a bandwidth command and also a bandwidth receive command. Entering the latter on an interface is not recognized by SW. The RX and TX values for the interface reflect the bandwidth command. So if you have an…
We run an NPM instillation of 100's of nodes, a large amount of them on ADSL, due to the large amount of sites setting custom bandwidth is not feasible both due to changing line conditions causing the bit rate to change and also the large amount of sites. At present we use a Universal Device Poller however Solarwinds…
Hello Chaps, I was hoping I could get the support of the community for Solarwinds to revisit how they calculate the interface bandwidth of xDSL interfaces specifically ADSL. As you know there are many variations of xDSL and the one I am focusing on is Asymmetric Digital Subscriber Loop. I have identified that Solarwinds…
Hi All, I have Orion polling hundreds of Cisco ADSL routers (877s, 1801s, etc.) and when discorvering the devices the speed levels of the ATM interfaces only takes the transmit speed and uses the same speed on the receive speed. Manually changing this is a tedious task. Is there a way to sort out the system to correctly…
Hi All, I've just noticed something wierd with our implementation of Orion NPM 9.5.1, in that the software is not detecting the transmit and recieve bandwidth values correctly for ADSL Interfaces on devices. To illustrate we have many routers with an MPLS primary link (with both transmit and recieve bandwidth being…
It looks like you're new here. Sign in or register to get started.