The most recent content from our members.
Hi i need clarification on how IPAM's IP conflict detection works,for sure. i read these two article IP address conflicts and Resolve IP address conflicts with IPAM and UDT integration. my network has 15 network subnet range, i do not have DHCP and all device ip configuration are applied manually, solarwinds have one NIC,…
I've upgrade our Orion environment with IPAM 4.0. One of the new features is the 'IP Address Conflicts'. Upgrade went well and the system is now reporting some Alerts en Events: ###Example: The IP address 10.15.7.254 is in conflict. The following devices were detected on network with same IP address: - PingSweep vs…
Just few days ago, I noticed IP conflicts are not being displayed in IPAM any longer. I tried stop/restarting all services and tried even rebooting the server. I even reinstalled the IPAM services and removed and re-added the DHCP servers in DHCP management. But the error displayed is below. Any help would be great. IP…
NCM Config Summary page has several default pie charts that display config status. One of these is the Overall Baseline vs Running Config Conflicts chart. If you have DELL PowerConnect 6200 series switches that are configured for SFlow, these charts will be erroneous as the PCT6200 switches will almost always be listed in…
Storage Manager lists the ports required to monitor and maintain your storage environment. Checking port availability before using Storage Manager can help save time and aggravation. Checking if required ports are available The example below shows how to investigate availability for port 162. 1. Open administrators command…
The reason I want to ignore this is because my "Overall Running vs. Startup Config Conflicts" percentage is not decreasing. This makes it look like something is wrong. The only difference is that the startup config does not store the certificate in clear text and you can see the certificate in the running config. Also I…
There's a few of reasons we would want to disable MAC Address Conflict detection on an IP address basis: * The Conflict is discovered by a combination of Neighbor/ARP scan and pings from other routers and HSRP * Proxy ARP issues? * Known faulty hosts whose MAC changes, but cannot be fixed * Troubleshooting situations where…
Hi, We've finally completed setting all our Cisco devices to be polled by our NCM box but it seems to be behaving a bit odd. We've set no Baselines and even gone into the GUI and using the Baseline Entire Network option selected Clear all Baselines yet the Overall Baseline vs Running Config Conflict still shows 1 device…
It looks like you're new here. Sign in or register to get started.