Community
- Command Central
- MVP Program
- Monthly Mission
- Blogs
- Groups
- Events
- Media Vault
Products
- Observability
- Network Management
- Application Management
- IT Security
- IT Service Management
- System Management
- Database Management
Content Exchange
- SolarWinds Platform
- Server & Application Monitor
- Database Performance Analyzer
- Server Configuration Monitor
- Network Performance Monitor
- Network Configuration Manager
- SQL Sentry
- Web Help Desk
Free Tools & Trials

Problem Adding Cisco Switch 9200 to NPM using SNMPv3

When adding the node through SNMPv3 the test connection tests successfully but when I hit next it times out and the error "currently down, unreachable, or provided credentials are not valid"

I have verified:
The connection is established
Traffic is permited
The switch configs are correct
The crednetials are correct

Attached is the snmpwalk

snmpwalk.txt

Find more posts tagged with

Accepted answers

All comments

NetworkingFun

This is the switch config

snmp-server group GROUP_SNMPV3 v3 priv access SolarWinds_SNMP
snmp-server trap-source GigabitEthernet0/0
snmp-server source-interface informs GigabitEthernet0/0
snmp-server location Bldg1_Room1
snmp-server host 192.168.100.100 vrf Mgmt-vrf informs version 3 priv SW_User_v3

ralexander

I'm not seeing an "snmp-server user" line in your config.
You should create a user and make them a member of the group you already have

alansmith

Second this. Also check your firewall to validate it is passing traffic.

NetworkingFun

Sorry I did not include the snmp-server user, but this was created. It doesnt show in when you do a show config but you can do show snmp user and I confirmed it is there.