Can I automate the results of a Cisco PGW MML command results
Hello Thwack Community
I am looking into a way to produce the results of the ( rtrv-ne-health::all ) command and display it on my Cisco PGW node report. What i am trying capture is the CPS value = 13csp this value will tell me if my PGW is handling calls at a acceptable rate. I have open a ticket with Cisco and they responded with this ( we have confirmed that there is no MIB & OID for CPS. You can get CPS number only by “mml>rtrv-ne-health::all" ). I was hoping create a custom device poller - or find another way to make sure the PGW Call Per Second value is displayed.
I was wondering if anyone has been able to monitor MML command and display the results in Orion . I have NPM 10.3.1 / SAM 5 latest version and the VoIP Q manager.
Mike
SYSTEM mml> rtrv-ne-health::all
MGC-01 - Media Gateway Controller 2012-08-20 11:45:26.275 EDT
M COMPLD
"Platform State:ACTIVE"
"0 critical, 0 major, 0 minor active alarms"
"Machine Congestion Level = MCL 0 (No Congestion), Reason: not applicable"
"Current in progress calls = 3726, half calls = 2558, full calls = 1182, call attempts = 13 cps"
"CPU 0 Utilization = 13 % CPU 1 Utilization = 12 %"
"CPU 2 Utilization = 10 % CPU 3 Utilization = 11 %"
"Memory (KB): 18048504 Free virtual, 25170384 Total virtual, 16776428 Total real, 531 Total Dial Plan"
"Interval ( TOT 25237 79454 582958"
"CALL: FailCall TOT 139 429 2927"
"CALL: SIPLicRej TOT 0 0 0"
"CALL: H323LicRej TOT 0 0 0"
"CALL: TDMLicRej TOT 0 0 0"
"CALL: TimesTenLicRej TOT 0 0 0"
Can I automate the results of a Cisco PGW MML command results
