We have a few chassis' that we use for VSS. I cannot find a way to monitor the line cards. All of the OIDs I find say "OID Not Supported" when I test them. Any help would be greatly appreciated.
Thanks!
I have the same question.
I found in the SNMP 1.3.6.1.2.1.47 ( entityMIB )
- 1.3.6.1.2.1.47.1.1.1.1.2.1000=Chassis 1 VS-SUP2T-10G ....
- 1.3.6.1.2.1.47.1.1.1.1.2.2000= ...
but I cannot found the oid if the card is Online, have minor, major of is not oke.
https://thwack.solarwinds.com/docs/DOC-148968
Looks like this uses OID 1.3.6.1.4.1.9.9.117.1.2.1.1.2. There are reports in the zip file along with the UDP. Do they work for you?
Try to use the following OID: 1.3.6.1.4.1.9.5.1.3.1.1.10 "The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure condition(s)."
This is the OID that I use.
When defining the UnDP, set Format to "Enumeration".
Map the values as such:
0 other
1 ok
2 minorFault
3 majorFault.
I use this for all my 6500s and 7600s.
This does not work for the 4500s I have tested. For 4500s I use 1.3.6.1.4.1.9.9.117.1.2.1.1.2
These values map as follows:
1 unknown
2 ok
3 disabled
4 okButDiagFailed
5 boot
6 selfTest
7 failed
8 missing
9 mismatchWithParent
10 mismatchConfig
11 diagFailed
12 dormant
13 outOfServiceAdmin
14 outOfServiceEnvTemp
15 poweredDown
16 poweredUp
17 powerDenied
18 powerCycled
19 okButPowerOverWarning
20 okButPowerOverCritical
21 syncInProgress
22 upgrading
23 okButAuthFailed
I'm looking for something similar, but for linecards on a 6807-XL.
I tried those for 6500, but couldn't get them to work?
