SRCOOLNET Poller

kk74859

Has anyone assigned a NPM poller to gather Temp, Humidity, Fan speed from a SRCOOL12K Air Conditioner \ SRCOOLNET (SNMP Network device)? I have added this device to NPM but can not figure how to gather Temp, etc..

Any advice would be appreciated. I have not added custom pollers and would need instructions on how to do so. ! ! !

eriskit

I know this has been floating in cyber space for a couple of years with no answer.

I myself had the very same question and a trip to the Tripp-Lite web site wasn't all that helpful either.

I was able to download the MIB's for the SRCOOLNET device and walk through it with the iReasoning MIB browser.

Loaded up the MIBS and bounced some queries against the SRCOOLNET. I was able to confirm the following OID's...

The following link was sent to me on how to create custom UNDP pollers.

https://support.solarwinds.com/Success_Center/Network_Performance_Monitor_(NPM)/Knowledgebase_Articles/Create_a_Universal_Device_Poller_UnDP_-_Video

Below you will see the description of the OID, and a sample of the responses I have harvested from my machine. I have included a few comments.

Sorry about the formatting...

Ident info group .1.3.6.1.4.1.850.104.1.1

Model Info

OID: .1.3.6.1.4.1.850.104.1.1.1.0

Value: SR(X)COOL12K

Type: OctetString

Manufacturer

OID: .1.3.6.1.4.1.850.104.1.1.2.0

Value: TrippLite

Type: OctetString

Serial #

OID: .1.3.6.1.4.1.850.104.1.1.3.0

Value: #################

Type: OctetString

Software Version

OID: .1.3.6.1.4.1.850.104.1.1.4.0

Value: 12.06.0069.13078.12917

Type: OctetString

Device Name

OID: .1.3.6.1.4.1.850.104.1.1.5.0

Value: AirConditioner2

Type: OctetString

Location information

OID: .1.3.6.1.4.1.850.104.1.1.6.0

Value: Datacenter rear corner

Type: OctetString

Current Mode

OID: .1.3.6.1.4.1.850.104.1.2.1.0

Value: cooling  (2)

Type: Integer

Fan Speed

OID: .1.3.6.1.4.1.850.104.1.2.2.0

Value: hi  (3)

Type: Integer

Return Air temp (no decimal point)

OID: .1.3.6.1.4.1.850.104.1.2.3.0

Value: 690

Type: Integer

Water level

OID: .1.3.6.1.4.1.850.104.1.2.4.0

Value: waterNotFull (0)

Type: Integer

Current Remote Temp (No decimal)

OID: .1.3.6.1.4.1.850.104.1.2.5.0

Value: 815

Type: Integer

Display units

OID: .1.3.6.1.4.1.850.104.1.2.6.0

Value: english (1)

Type: Integer

On/Off

OID: .1.3.6.1.4.1.850.104.1.3.1.0

Value: turnOnUnit  (1)

Type: Integer

Set Mode

OID: .1.3.6.1.4.1.850.104.1.3.2.0

Value: cooling (0)

Type: Integer

Set Point Temp (No decimal)

OID: .1.3.6.1.4.1.850.104.1.3.3.0

Value: 630

Type: Integer

Fan speed setting

OID: .1.3.6.1.4.1.850.104.1.3.5.0

Value: high (3)

Type: Integer

Remote Set Point enable

OID: .1.3.6.1.4.1.850.104.1.3.6.0

Value: disable (0)

Type: Integer

Fan Always on

OID: .1.3.6.1.4.1.850.104.1.3.7.0

Value: disable (0)

Type: Integer