Working with Temp Threshhold (Warning /Critical)

Question

Hi

I can define  "Custom Threshold Defined" to some nodes...

But where is General Temp Threshhold ?

I like to move from  temp alert that " has temp=Xy"

to alert when the Threshold  is =xy

silverbacksays · Answer

It depends on the individual sensor. The warning threshold would be when the sensor is shown as yellow, and the critical threshold is when the sensor is shown as 'RED'.

sja · Answer

Hey Silver

I still don't get where /what   are the default for node temp?

Do you have alert logic that use " warning " and "critical " ?

I still not happy with the new alert engine...

Logout

* Admin
* Manage Hardware Sensors
* Manage Sensor Status

Manage Sensor Status

By default, Orion uses its internal rules to determine the status of a sensor. If you're having trouble with a sensor, you can override the Orion logic. If you're not concerned about a sensor, you can force Orion to map any reading to the OK status.* Use Orion defaults - Use the built-in Orion logic for translating sensor reading to status.
* Force to "Up" - Ignore sensor readings when calculating status. The status is always Up.
* Set custom thresholds - Create your own logic for mapping sensor readings to Orion status.

silverbacksays · Answer

This would be done through 'Settings>Manage Hardware Sensors'. You'll need to find the specific sensor you want to adjust the thresholds for, and edit it, then override the Orion Thresholds (bottom radio button). Then enter your preferred threshold values.