Cisco SF300 Switch OID SF300-48P

Hi,

Can anybody provide me the OID of an Cisco SF300-48P?

I have tried these that I have found but they don't work:

alHardwareCpuTemp
OID	1.3.6.1.4.1.3076.2.1.2.22.1.29
Type	Integer32
Permission	read-only

pecific Object Information

Object	alHardwareCpuTempAlarm
OID	1.3.6.1.4.1.3076.2.1.2.22.1.30
Type	TruthValue
Permission	read-only
Status	current

I want to monitor the CPU temperature.

Thanks!

Find more posts tagged with

temperatureature

mib_oid

sf300

oid

cisco

cisco cpu monitoring

Accepted answers

All comments

deverts

remi f,

Please post this in the NPM forum for more visibility. That said, I have (had) some of these in my environment and they don't support SNMP very well. These switches are Cisco's way of trying to get into the small office environments and compete with the D-Link, Netgear, Linksys stuff that is on the market. And most of those companies/environments don't have monitoring in place. I've actually replaced all my SF300 with 3560C or 2960C switches and have been much happier. I think I still have an SF300 in my lab, I'll see if I can find the correct OID for your issue, but knowing the limitations of this device, I can't promise anything.

deverts

remi f,

The correct OID begins at 1.3.6.1.4.1.9.6.1. However, as I suspected, there are CPU or memory (hardware) related OIDs in the list for these devices.

remi_f

Thank you Deverts I will try the OID's.

GoldTipu

Multiple CPU Count & Each Load on CPU for the Node

(For Cisco )

1.3.6.1.4.1.9.9.109.1.1.1.1.2 (Total Physical Index of CPU )

1.3.6.1.4.1.9.9.109.1.1.1.1.7 (Total 1 min for each CPU)

1.3.6.1.4.1.9.9.109.1.1.1.1.8 (Total 5 min for each CPU )

For Cisco Extreme Switches

1.3.6.1.4.1.1916.1.1.1.28.0 ( extremeCpuAggregateUtilization )

Foundry

extremeCpuAggregateUtilization

1.3.6.1.4.1.1916.1.1.1.28.0