Broadcast monitoring

Question

Hi,

Is there a way to monitor broadcast counter with orion.  This information is usualy available in router like cisco.  See below for an example.

Thanks !

GigabitEthernet1/3 is up, line protocol is up (connected)
  Hardware is C6k 1000Mb 802.3, address is 000f.f780.9436 (bia 000f.f780.9436)
  Description: TC4-L1/L2 RDC
  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Keepalive set (10 sec)
  Full-duplex, 1000Mb/s, media type is SX
  input flow-control is off, output flow-control is on
  Clock mode is auto
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:30, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 32000 bits/sec, 20 packets/sec
  5 minute output rate 395000 bits/sec, 46 packets/sec
     1152691155 packets input, 405476507566 bytes, 0 no buffer
     Received 5379123 broadcasts (2774373 multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 watchdog, 0 multicast, 0 pause input
     0 input packets with dribble condition detected
     1379730567 packets output, 1176390158216 bytes, 0 underruns
     0 output errors, 0 collisions, 3 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier, 0 PAUSE output
     0 output buffer failures, 0 output buffers swapped out