Status PSU for devices with two PSU

Question

On the Cisco 7606 installed 2 power supply unit.
Can I using Universal Poller obtain information about primary and secondary power supply unit?
With SNMP Get (MIB OID 1.3.6.1.4.1.9.9.13.1.5.1.3, name ciscoEnvMonSupplyState) I get information about state only one PSU - primary or secondary

AlexSl · Answer

To Ichance

I can generate a different Alert for the first and second PSU using Row ID
I can not draw the first and second PSU state in the web page ((((

I looked CiscoStackMIB
Can use:
chassisPs1TestResult 1.3.6.1.4.1.9.5.1.2.5 
chassisPs2TestResult 1.3.6.1.4.1.9.5.1.2.8

But!!!((((

MIB is supported by Cisco7600, but is not supported on Cisco4500 (((

AlexSl · Answer

To slake

I tried to do so
Not working ((((

slake · Answer

I use 1.3.6.1.4.1.9.9.13.1.5.1.3 for the first power supply, and 1.3.6.1.4.1.9.9.13.1.5.1.3.2 for the second power supply. We are in load sharing mode. Seems to work. I haven't turned one off to test though.

1.3.6.1.4.1.9.9.13.1.5.1.3   Mib Value=RAW, Format=none,  SNMP Get type=Get Next

1.3.6.1.4.1.9.9.13.1.5.1.3.2 Mib Value=RAW, Format=none,  SNMP Get type=Get

I think the second has to be Get only because it's pulling from a table.