HW health monitoring - send us your SNMP walks

In order to test a new functionality (HW health monitoring in NPM) we are currently working on, we would need to see&verify few SNMP walks from your devices.

We are looking specifically for following SMP walk for Cisco device which responds on OID's from following branches:

1.3.6.1.2.1.47.1.1
1.3.6.1.4.1.9.9.91
1.3.6.1.4.1.9.9.13

For Juniper:

1.3.6.1.4.1.2636.3.1

And For HP:

1.3.6.1.2.1.47.1.1
1.3.6.1.4.1.11.2.14.11.1.2

To grab SNMP walk you can use our tool - SolarWinds Knowledge Base :: SolarWinds SNMP Walk: A new tool for collecting SNMP MIB walks

You can send your results directly to me (michal.hrncirik at solarwinds.com).

As always, your help is highly appreciated and it can speed up the things.

thanks,

Michal

Find more posts tagged with

hw_health

snmp_walk

Accepted answers

All comments

michal.hrncirik

I'd like to say big thanks to all who already contributed and sent us their walks - our DEV team was very pleased by that.

thanks again,

Michal

jspanitz

Michal - I didn't see this post until just now. Are you still looking for SNMP walks?

Also, is the HW health monitoring going to utilize the native capabilities of Juniper switch gear - Juniper Networks - Health Monitoring on the EX-series Switches - Knowledge Base

michal.hrncirik

Hi John,

feel free to send me your MIB walks.

Regarding the Juniper switches - they should be supported. I would really appreciate if you could install our Beta 2 build and try our HW health monitoring feature in order to validate functionality on your devices as well as data consistency.

HW health resources are not displayed by default you please read this post to enable them: http://thwack.solarwinds.com/thread/51207

thanks for your help,

Michal