Help on CISCO ASR 1002 SNMPv3 config

bhavesh2903

Hi Below is the running SNMP config below of config and i'm not getting SNMP from NPM it shows FAILED

snmp-server user <username> <groupname> v3 auth md5 <pwd> priv aes 192 <pwd >

snmp-server context Justdial
snmp-server group Justdial v3 auth context Justdial
snmp-server group Justdial v3 auth
snmp-server host 192.168.6.94 version 3 auth Justdial    

Note : My context name, group name and username is all Justdial

farhankhan

Mainly you need to run following two commands

1) Syntex    : snmp-server user <USERNAME> <SNMP_USER_GROUP> v3 auth sha <YOUR_PW>  priv aes 128 <YOUR_PW> SystemOwner

Example : snmp-server user snmpv3 user  mysnmpgroup v3 auth sha password1234  priv aes 128 password1234 SystemOwner

2) Syntex : snmp-server group <SNMP_USER_GROUP> v3 priv notify SNMP-VIEW-RW write SNMP-VIEW-RW <SNMP_ipv4_ACL>

Example snmp-server group mysnmpgroup v3 priv notify SNMP-VIEW-RW write SNMP-VIEW-RW snmpacl

try to use third party snmpwalk for verification as for some reason sometimes SW webinterface keep coping the old keys which you used first time.

Cheers