Just curious to see if anyone has any tips on if/how this could be accomplished... We have 300+ Data closets that are being monitored for high temperatures using the Geist "Weathergoose" OID (1.3.6.1.4.1.21239.2.2.1.6)/SNMP Component monitoring. Problem is, some of the closets average in the 70's and some in the lower 90's. We've been tweaking the alert thresholds or setting the baseline for the closets but our goal is to tweak the alert action so that will allow us to show the last 8 hours of temps in 2 hour increments. This will allow us to see how rapidly the temperature is rising.
(Plus, If we can figure this out, we are also looking at tweaking the alert to look for (A) Temperature over X or (B) Temperature has risen over X degrees in the past X hours.)
Example Alert, Bold is what we are looking to add:
IDF Name is currently at 94 degrees.
Alert Type: WG Temperature Monitor
Severity: Critical
Triggered at: Wednesday, February 1, 2017 9:53 AM
Times Triggered: 43
Device IP: 10.100.216.100
Temperature: 94
Model: Watchdog 1250
Latest Temps:
2 hours ago: 90
4 hours ago: 86
6 hours ago: 81
8 hours ago: 77
Warning / Critical Alert Temp= 92 / 98
Any assistance/guidance is greatly appreciated!!
