"Transfer failure due to connection interrupt during execute script"

To
start with, I’m new with Solarwinds NCM. We purchase the product 4
months back and the person who suppose to handle this is being transfer
to other section.

Anyways,
I’m just starting to study the product last week. I already add some
of our Cisco nodes and also tested the backup config successfully.

Today
I’m starting to test how to push the configuration (manually and auto)
to one of our Cisco 3750 switch using one of the template (change login banner) which I downloaded here in twack.

But after executing the script , there’s an error: "Transfer failure due to connection interrupt during execute
script".

I already log a case on Solarwinds Support. According to them the issue is on the Cisco device.

Does anybody could help me.

Thanks

Find more posts tagged with

Accepted answers

All comments

Nandish

Would you post the ticket # to look in further?

endata

Case #286762 .

ElDeeBee

User did not include the actual script he is using.

What he was told was that the issue is coming from the script itself on the device, and not the device itself.

Below is the failing script:

/*
.CHANGE_TEMPLATE_DESCRIPTION
        Change Login Banner on Cisco IOS devices
.CHANGE_TEMPLATE_TAGS
                Cisco
.PLATFORM_DESCRIPTION
        Cisco IOS
.PARAMETER_LABEL @ContextNode
        NCM node
.PARAMETER_DESCRIPTION @ContextNode
        The node the template will operate on. All templates require this by default. The target node is selected during the first part of the wizard so it will not be available for selection when defining variable values

.PARAMETER_LABEL @LoginBanner
        Login Banner
.PARAMETER_DESCRIPTION @LoginBanner
        Enter new login banner text

*/

script ChangeLoginBannerCiscoIOS (
                                           NCM.Nodes @ContextNode,
                                           string @LoginBanner )
{
  CLI
  {
    configure terminal
    no banner login
    banner login C@LoginBanner C
    exit
  }

}

For some reason, the script is generating the error and not NCM.

endata

Our Cisco devices has a tacacs configured. On the above example script , should I add extra command to enable the tacacs? Maybe that is the reason? Correct me if I'm wrong.