While upgrading a cisco device using the Firmware Upgrade in NCM the files uploads and begins to verify when the process fails. Below is the following information.
Destination filename [c3560c405ex-universalk9-mz.152-2.E6.bin]?
Accessing t192.168.8.12/c3560c405ex-universalk9-mz.152-2.E6.bin...
Loading c3560c405ex-universalk9-mz.152-2.E6.bin from 192.168.8.12 (via Vlan199): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 20617216 bytes]
20617216 bytes copied in 410.696 secs (50201 bytes/sec)
dir flash: ${SuccessRegEx:c3560c405ex-universalk9-mz.152-2.E6.bin}
Directory of flash:/
2 -rwx 1716 Mar 29 2011 20:28:41 -05:00 vlan.dat
3 -rwx 20617216 Nov 14 2017 08:47:59 -06:00 c3560c405ex-universalk9-mz.152-2.E6.bin
4 -rwx 5144 Nov 14 2017 08:45:38 -06:00 multiple-fs
7 -rwx 11604 Nov 14 2017 08:45:37 -06:00 config.text
5 -rwx 2292 Nov 14 2017 08:45:38 -06:00 private-config.text
6 -rwx 21568478 Aug 21 2014 11:16:41 -05:00 c3560c405ex-universalk9-mz.152-1.E3.bin
57931776 bytes total (15380480 bytes free)
Verifying uploaded image...
ERROR Connection Refused by 10.244.16.31
Any Ideas of why this is happening?
The connection can obviously establish, and only fails once it gets to the verification stage.
Message was edited by: Andrew Clark
