Assistance with SNMP trap configuration script

rbrantley

Attempting to build a configuration template that will take into account a location(Core Site) and a OID to determine what configuration to apply and I'm having a couple of issues. The nesting seems to work for the ones labelled '3Com 4400'. I can select multiple devices of this type on various core sites and it figures the correct script to use with each one. Outside of that however, none of the other devices by OID are working(3Com 45xx, Extreme, Cisco, Juniper). When those devices are selected it returns each one with 'No Script' and if then I tell it go ahead and execute it shows Could not connect to x.x.x.x, most likely because there is nothing to do I believe. Could someone read over the logic and see if I'm missing something?

Also several of the core sites checks could be condensed, I just can't seem to figure out how to do it. Switches within a core site point to the same trap host. For example:

• 10.20.1.249 - Core A and Core B
• 10.20.1.248 - Core C, Core D, Core E, and Core F
• 10.20.1.247 - Core G, Core H, and Core I

So is it possible to condense this down from this aspect:

• IF ( @ContextNode.CoreSite startsWith 'Core A'  OR 'Core B' )
  

/* .CHANGE_TEMPLATE_DESCRIPTION         This change script adds the SNMP trap target host. .PLATFORM_DESCRIPTION         This change script adds the SNMP trap target host. .PARAMETER_LABEL @ContextNode         NCM Node .PARAMETER_DESCRIPTION @ContextNode         The node the template will operate on.  All templates require this by default. The target node is selected during the first part of the wizard so it will not be available for selection when defining values of variables. */ script addTarget ( NCM.Nodes @ContextNode ) {   foreach ( @node in @ContextNode )   {         IF ( @ContextNode.CoreSite startsWith 'Core A' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.249                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.249 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.249 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.249 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.249                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core B' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.249                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.249 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.249 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.249 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.249                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core C' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.248                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.248 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.248 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.248 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.248                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core D' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.248                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.248 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.248 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.248 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.248                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core E' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.248                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.248 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.248 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.248 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.248                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core F' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.248                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.248 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.248 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.248 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.248                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core G' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.247                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.247 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.247 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.247 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.247                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core H' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.247                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.247 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.247 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.247 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.247                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }         IF ( @ContextNode.CoreSite startsWith 'Core I' )       // 3Com 44xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.10.27.4.1.2.4' )                     CLI                      {                       system management snmp trap create monitor 10.20.1.247                      }       // 3Com 45xx Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.43.1.16.4.3' )                     CLI                      {                       system                       snmp-agent target-host trap address udp-domain 10.20.1.247 params securityname snmp                       quit                       save flash:/3comoscfg.cfg                       y                       y                      }       // Extreme Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.1916.2' )                     CLI                      {                       configure snmp add trapreceiver 10.20.1.247 community snmp                       save                       yes                      }       // Cisco Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.9.1' )                     CLI                      {                       config t                       snmp-server host 10.20.1.247 snmp                       end                       wr mem                      }       // Juniper Device             IF ( @ContextNode.SystemOID == '1.3.6.1.4.1.2636.1.1.1.2' )                     CLI                      {                       config                       set snmp trap-group snmp_trap categories link                       set snmp trap-group snmp_trap targets 10.20.1.247                       set ethernet-switching-options mac-notification notification-interval 5                       commit-and-quit                       exit                      }      } }