Monitoring certain bgp peer state

I have a juniper router that peering with multiple peers, i wanted to monitor certain peer status, i have created the universal device poller with oid 1.3.6.1.2.1.15.3.1.2 (bgppeerstate), but the problem is, it polls all the peering that from that juniper router, so how can i trigger the alarm only for peer let's say peer 1.1.1.1, 2.2.2.2, and 3.3.3.3 when the return value is not equal to 6? The current alarm is trigger when seeing any of the peer is not equal to 6, that is not what i want.

Find more posts tagged with

Accepted answers

All comments

mharvey

If you are running the latest version of NPM, 10.3, you should be able to create a Custom Node Table Poller alert, and specify a condition group where any of the following apply, then specify the RowID would be either 1, 2, or 3. This would limit the alert to only those specific rows.

Regards,

Matthew Harvey

Loop1Systems

http://www.loop1systems.com

vovochka

i am running on NPM 9, still have the Custom Node Table Poller alert function?

mharvey

Unfortunately no, this wasn't introduced until v10.3. I would highly recommend an upgrade of your Orion system in order to take advantage of this feature to get the alerting you are after.