Frame-relay Bandwidth Mis-Match

Question

Purpose:
Detects and reports Bandwidth mis-match between what Orion has as a configured interface speed and what the device interface has configured.
Validates that Frame-relay circuit upgrades have been updated in Orion

Prerequisite:
Device/interface must be already monitored in Orion

Optional:

Report Scheduler job defined to send report daily

Bandwidth_Mis-match_-_Frame_Relay_Interfaces.OrionReport

jtimes · Answer

Modify the Interface type number to the corresponding number for the type of interface 
(InterfaceType=6)  Ethernet (all fast/gig etc)
(InterfaceType=9)  TokenRing (BrokenRing)
(InterfaceType=22)  Serial (non-Frame-relay) 
(InterfaceType=171) POS 
(InterfaceType=49) ATM - aal5
(InterfaceType=53)  PortChannel

There could be more, just open the Interfaces table in DB Manager and find them.

Don't forget to use "Save As" then change the report name to the corresponding topology

jmcgrath · Answer

I need to make sure that the NICs bandwidth on my VMs match the physical network. For example one server is set to 100 Mbps but the physical NIC is 1000 Mbps, so when it starts to use more bandwidth it is over 100%. Can this report identify this? If so what do I need to include in the report?