Hello,
i am interested in seeing the traffic on my layer 3 VLAN interfaces. I have tried a combination of commands and I can't get data to flow to the NTA. Here is a cutout of my configuration on the 6509, SUP720...
1st, here is the sh ver:
sh ver
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(33)SXI2, RELEASE SOFTWARE (fc3)
config:
mls netflow interface
mls flow ip interface-full
mls nde sender version 5
mls qos map cos-dscp 0 8 16 24 32 46 48 54
mls qos
mls cef error action reset
!
!
!
!
interface Vlan11
description Library
ip address 172.16.22.1 255.255.254.0
ip helper-address 172.16.30.178
ip helper-address 172.16.30.124
no ip unreachables
ip flow ingress
ip flow egress
!
interface Vlan16
description OIT Technology Center
ip address 172.16.32.1 255.255.254.0
ip helper-address 172.16.30.178
ip helper-address 172.16.30.124
no ip unreachables
ip flow ingress
ip flow egress
!
interface Vlan32
ip address 172.16.64.1 255.255.254.0
ip helper-address 172.16.30.178
ip helper-address 172.16.30.124
no ip unreachables
ip flow ingress
ip flow egress
!
interface Vlan33
ip address 172.16.66.1 255.255.254.0
ip helper-address 172.16.30.178
ip helper-address 172.16.30.124
no ip unreachables
ip flow ingress
ip flow egress
!
interface Vlan34
ip address 172.16.68.1 255.255.254.0
ip helper-address 172.16.30.178
ip helper-address 172.16.30.124
no ip unreachables
ip flow ingress
ip flow egress
!
ip flow-export source Vlan16
ip flow-export version 5
ip flow-export destination 172.16.30.89 2055
!
no ip http server
no ip http secure-server
!
!
logging history warnings
logging trap errors
logging 172.16.30.89
!
snmp-server engineID local 8000000903000025461FF400
snmp-server community slunetflow RO
snmp-server community STLEO RO
!
!
control-plane
!
!
dial-peer cor custom
!
!
!
banner motd ^C
CC
<<<<<<<<<<<<<<<<< ---- St. Leo University ---- >>>>>>>>>>>>>>>>>>>
<<<<<<<<<<<<<<<<<<<< ---------WARNING---------- >>>>>>>>>>>>>>>>>>>>>>
Access to this device is limited to authorized persons only. All
efforts to achieve access, whether direct or indirect, are subject to
monitoring activities. Unauthorized access is prohibited and will be
subject to incident reporting procedures including notification of
local, state and federal authorities.
<<<<<<<<<<<<<<<<<<<< ---------WARNING---------- >>>>>>>>>>>>>>>>>>>>>>
^C
!
line con 0
password 7 01000A11540212
login
line vty 0 4
password 7 150107190B233F
login
line vty 5 15
password 7 0317571E090635
login
!
!
ip flow-export source Vlan16
ip flow-export version 5
ip flow-export destination 172.16.30.89 2055
!
!
!
end
I only get the "Never" messages on the NTA photo, please view attached photo.
Any pointers on how to get this working?
Thanks
Derek
