Hi
Does any one has problem with upload macro config?
I think NCM has problem with @ in the end of the config ?
macro name STANDARD_NOINTERNET_CPEMGMT
shutdown
switchport trunk encapsulation dot1q ! May fail - ignore
switchport mode private-vlan trunk
switchport private-vlan association trunk 8 7
switchport private-vlan trunk native vlan 7
switchport private-vlan trunk allowed vlan 2,7
no switchport private-vlan trunk native vlan tag
switchport nonegotiate
switchport block multicast
switchport block unicast
switchport port-security
switchport port-security maximum 2
switchport port-security aging time 60
switchport port-security aging type inactivity
ip access-group access-nointernet in
max-reserved-bandwidth 99 ! May fail - ignore
duplex full ! May fail - ignore
no snmp trap link-status
qos trust dscp ! May fail - ignore
storm-control broadcast level 1.00
storm-control action shutdown
tx-queue 3 ! May fail - ignore
priority high ! May fail - ignore
no cdp enable
spanning-tree portfast trunk ! May fail - ignore
spanning-tree portfast edge trunk ! May fail - ignore
spanning-tree bpdufilter enable
spanning-tree bpduguard enable
ip igmp max-groups 7
ip igmp max-groups action replace
ip igmp filter 20
ip verify source vlan dhcp-snooping
ip dhcp snooping limit rate 15
end
