Hello
How to config please routeur ip sla and the probe?
Cordialement
Here is an example of what I use for one of my routers:
track 11 ip sla 11
!
track 12 ip sla 12
ip sla auto discovery
ip sla 11
icmp-echo xx.xx.xx.xx
ip sla schedule 11 life forever start-time now
ip sla 12
icmp-echo xx.xx.xx.xx source-interface GigabitEthernet0/0
frequency 30
ip sla schedule 12 life forever start-time now
I have included the two different ones to show how you can indicate what interface you want the icmp-echo to use. Please let me know if you have any questions. I also use my ip sla for tracking my HSRP, so that is at the top as well.
When you add a node to the VNQM module (Previously IPSLA) you should be able to add a CLI credential or the SNMP Read/Write credential. SolarWinds will automatically update the IPSLA configuration in the node's configuration via either CLI or SNMP.
Thank you very much!
Hello,
How to monitor a router IP SLA in solarwinds?
Thanks
Hello, how to add a CLI credential or the SNMP Read/Write credential?
chira wrote:Hello, how to add a CLI credential or the SNMP Read/Write credential?
chira wrote:
I just replied to this message in your other thread. But basically add the node into NPM which is where you assign the CLI & SNMP credentials.
