We are implementing Solarwinds NTA and I'm trying to get sFlow working on our HP Procurve 4208vl switch.
I was able to enable sFlow by entering the following commands:
setmib sFlowRcvrAddress.1 -o 0A00020C (10.0.2.12)
setmib sFlowRcvrOwner.1 -D sFlowowner sFlowRcvrTimeout.1 -i 100000000
setmib sFlowRcvrPort.1 -i 2055
After entering "walkmib ifName" to get the PVID mappings - I entered these command to configure port C2:
setmib sFlowFsReceiver.11.1.3.6.1.2.1.2.2.1.1.54.1 -i 1
setmib sFlowFsPacketSamplingRate.11.1.3.6.1.2.1.2.2.1.1.54.1 -i 512
setmib sFlowFsMaximumHeaderSize.11.1.3.6.1.2.1.2.2.1.1.54.1 -i 128
setmib sFlowCpReceiver.11.1.3.6.1.2.1.2.2.1.1.54.1 -i 1
setmib sFlowCpInterval.11.1.3.6.1.2.1.2.2.1.1.54.1 -i 30
After any of these commands, the following message is returned:
sFlowFsReceiver.11.1.3.6.1.2.1.2.2.1.1.54.1: Unable to create.
Can someone help me to get this working?
Thanks in advance,
Steve
Useful Information:
Software revision : L.10.23
ROM Version : L.10.03
OURSWITCH# walkmib 1.3.6.1.4.1.14706
sFlowVersion.0 = 1.3;HP;L.10.23
sFlowAgentAddressType.0 = 1
sFlowAgentAddress.0 = 0a 00 02 11
sFlowRcvrOwner.1 = sFlowowner
sFlowRcvrTimeout.1 = 99,946,298
sFlowRcvrMaximumDatagramSize.1 = 1400
sFlowRcvrAddressType.1 = 1
sFlowRcvrAddress.1 = 0a 00 02 0c
sFlowRcvrPort.1 = 2055
sFlowRcvrDatagramVersion.1 = 5
Websites I used for info:
http://m1xed0s.blogspot.com/2012_12_01_archive.html
http://thwack.solarwinds.com/thread/53070vl S
