Assistance with Advanced Alert creation with mulitple variables

I am trying to create an alert for the following. If volume /dev/oradata OR /dev/hd2 file size is between 90% and 97% on server xx OR server yy alert me. So far when I set up the alert it gives me the information BUT on every single server instead of those two. Please help so I can stop banging my head on my desk. THANKS!

Orion Core 2011.2.0, APM 4.2.0, IPAM 2.0.1, IPSLAMGR 3.5.1, NCM 6.1, NPM 10.2, NTA 3.8.0, IVIM 1.2.0

Find more posts tagged with

advanced_alerts

advanced_alert

Alert

advanced_alert_setup_question

volume_alert_for_specific_node

Accepted answers

All comments

mcbridea

Can you post a screenshot of the trigger?

mrxinu

You'll need to nest the conditions. Try this:

Trigger when all of the following conditions are met: <-- the top-level default group; no need to create this

Volume Type is 'Fixed Disk'

Volume PercentUsed is greater than or equal to 90 <-- will fire through 90, 91, and up into 99 and 100% but that's probably okay too

Trigger when any of the following conditions are met:

Volume Caption is equal to '/dev/oradata'

Volume Caption is equal to '/dev/hd2'

Trigger when any of the following conditions are met:

Node Caption is equal to 'serverXX'

Node Caption is equal to 'serverYY'

That should cover the following conditions: serverXX /dev/oradata is overused, serverYY /dev/oradata is overused, serverYY /dev/hd2 is overused, and serverYY /dev/hd2 is overused.

ahmedadeleke05

MrXinu I tried you suggestion but only one problem Advance alert was still sending details from other nodes

mrxinu

The interface is a little tricky at first. Look at how the trigger condition groups are lined up. You need to delete third section and add it under the top section. See the image below. The section I've circled needs to be moved left. Delete it and re-add it, but make sure you're clicking the ellipsis (...) to the left of the top-level condition (Trigger Alert when all of the following apply) at the top of the window.

ahmedadeleke05

Thanks for the reply but please can you explain in details step what I need to do.

To my understanding you want me to move or re-add the two node name to the top of the trigger condition