I'm testing Cirrus 4.0.1 with a Nortel 2216 running 22.0.7.1. I'm using SSH and it logs in fine, but the configuration downloads are not working. The problem seems to be that SolarWinds doesn't know that the configuration dump is done.
When you login the prompt is >> Main#
After running the command /cfg/dump the prompt will be >> Configuration. SolarWinds seems to be stuck looking for >> Main#, never sees it and times out.
I'm using the Alteon device template posted in the Content Sharing.
Here's some output from the session trace - first the begining and the /cfg/dump. You will see errors relating to ${Reset} since this is not defined in the template. I have tried defining it to "" with no change in behavior other than the ${Reset} errors going away.
Command mode prompt detected at LoginState_Password
Prompt is being set to : >> Main#
Logged into Router
<--
-->
-->
--> >> Main#
Process Line = <>
Process Line = <>
Process Line = <>> Main# >
<-- ${Reset}
--> ${Reset}
--> Error: unknown command "${Reset}"
-->
--> >> Main#
-->
--> >> Main#
Echo not detected yet. push back data to echo buffer, EchoBuffer = <<<${Reset}
Error: unknown command "${Reset}"
>> Main#
>>>
Process Line = <${Reset}>
Process Line = <Error: unknown command "${Reset}">
Process Line = <>
Process Line = <>> Main# >
Waiting for the Current Command (${Reset}) to be Echoed
Process Line = <>
Process Line = <>> Main# >
Waiting for the Current Command (${Reset}) to be Echoed
TimerTick: mstrData=<>> Main# > State=3 - Connected to server - idle
Pending Disconnect = False
TimerTick: mstrData=<>> Main# > State=3 - Connected to server - idle
Pending Disconnect = False
TimerTick: Saw Fuzzy Match to prompt
LastData: >> Main# - Prompt: >> Main#
<-- /cfg/dump
--> /cfg/dump
--> script start "Nortel Application Switch 2216" 4 /**** DO NOT EDIT THIS LINE!
--> /* Configuration dump taken 13:59:30 Thu Jun 12, 2008
This is what it looks like after the config dump is done.
Process Line = <script end /**** DO NOT EDIT THIS LINE!>
Save Command Output: script end /**** DO NOT EDIT THIS LINE!
Process Line = <>
Process Line = <>> Configuration# >
Save Command Output: >> Configuration#
Process Line = <>
Process Line = <>> Configuration# >
Pushing back: <>> Configuration# >
mPrompt is : <>> Main# >
TimerTick: mstrData=<>> Configuration# > State=3 - Connected to server - idle
Pending Disconnect = False
TimerTick: mstrData=<>> Configuration# > State=3 - Connected to server - idle
Pending Disconnect = False
TimerTick: Just tick-tockin away. ..
TimerTick: mstrData=<>> Configuration# > State=3 - Connected to server - idle
Pending Disconnect = False
TimerTick: Just tick-tockin away. ..
