Community
- Command Central
- MVP Program
- Monthly Mission
- Blogs
- Groups
- Events
- Media Vault
Products
- Observability
- Network Management
- Application Management
- IT Security
- IT Service Management
- System Management
- Database Management
Content Exchange
- SolarWinds Platform
- Server & Application Monitor
- Database Performance Analyzer
- Server Configuration Monitor
- Network Performance Monitor
- Network Configuration Manager
- SQL Sentry
- Web Help Desk
Free Tools & Trials
Store

Netflow for ASA5555

Hi I am trying to try the NTA for our ASA5550 device. Would you please clarify these two points that had me confused after reading the KB.

Hi I have to questions from this post since Im configuring ASA5550:

1. What should the port set to be for (config)# flow-export destination inside 10.2.2.2 2055?

2055 0r 9996?

2. Also, will this matter if i chose OUTSIDE instead of INSIDE: (config)# flow-export destination inside 10.2.2.2 2055...

since it mentions on the KB that' Replace <interface name> with the interface name that will be used to send exports to Orion NTA. This interface must be on the same side of the ASA as the Orion server.'

Thanks.

Find more posts tagged with

Accepted answers

mcbridea

Answers below:

1 - Port does not matter as long as NTA is set to accept flows on that port. The default port for NTA is 2055. You can add 9996 in the NetFlow Settings page using a comma between port numbers (2055, 9996).

2. If the NTA server is on the inside use inside, on the outside use outside.

Andy

All comments

mcbridea

Answers below:

2. If the NTA server is on the inside use inside, on the outside use outside.

Andy

acgarcia1

Hi mcbridea,

Thank you. My lab simulation worked. I just added the port 9996 as suggessted above.

Great job.

mcbridea

Happy to see that fixed it for you!