Cisco CUBE voip dial-peers statistics

rusfatman

Hello.

I need to collect statistics from dial-peers about incoming and outgoing calls.

I have some OIDs:

Incoming:

1.3.6.1.4.1.9.9.63.1.3.8.4.1.1.XXX

Outgoing:

1.3.6.1.4.1.9.9.63.1.3.8.4.1.2.XXX

Can anybody says: how can i assign them on dial-peers, collect statistics and write a graph on Web interface?

Thank you.

kjoseph2000

I can't tell you how to integrate with solar winds but to pull dial-peer SNMP stats from CUBES, you can use snmpwalk or snmpbulkwalk

snmpbulkwalk -v2c -c <communitystring> <HOST>  <MIB>

example

    snmpbulkwalk -v2c -c public 192.168.13.1 1.3.6.1.2.1.10.21.1.2.2.1.5

      SNMPv2-SMI::transmission.21.1.2.2.1.3.100.39 = Gauge32: 572687

      SNMPv2-SMI::transmission.21.1.2.2.1.3.120.40 = Gauge32: 54374

      SNMPv2-SMI::transmission.21.1.2.2.1.3.160.41 = Gauge32: 21545

    (for this MIB 100, 120, & 160 are the dial-peers)

common MIBs I graph

1.3.6.1.4.1.9.9.63.1.3.8.4.1.1    - Inbound dial-peer active calls

1.3.6.1.4.1.9.9.63.1.3.8.4.1.2    - Outbound dial-peer active calls

1.3.6.1.2.1.10.21.1.2.2.1.3    - Inbound dial-peer Calls since reboot ( use delta between intervals to get calls/ interval )

1.3.6.1.2.1.10.21.1.2.2.1.5    - Outbound dial-peer Calls since reboot ( use delta between intervals to get calls/ interval )