Aborting command entry due to command error

elouie

I have a problem with a device in configuration mode.

I try to apply 2 commands and one is applied ok, the 2nd one does not seem to work.

Here's the sequence:

Waiting for command prompt

Waiting for an echo of system-view command

Waiting for an echo of super command

Waiting for an echo of acl number 2003

[Then a 33 second pause]

Stopping Activity.

Here are the 2 commands

acl number 2003

rule 110 permit source 10.209.127.174 0

Here's what it looks like when I paste it into the device

[sysname-1]acl number 2003

Info: When the ACL that is referenced by SACL is modified, the SACL will be dynamically updated. During the update, these SACL will become invalid temporarily.

[sysname-1]rule 110 permit source 10.209.127.174 0

Thanks for your help

elouie

This problem was caused by the device changing the prompt from [sysname-1] to [sysname-1-acl-basic-2003].

Unfortunately, there is no workaround such as ignore the prompt contents in CatTools.

They are pushing this to the development team, so it will likely be a while before a resolution is generated.