MIBs and OIDs for HP servers

licensing7

Hey guys, just wondering which MIBs/OIDs are used to monitor HP server hardware. I want to set up traps for specific hardware failure (RAM and disk array in particular).

Thanks in advance.

Grant

Fodome

Hi Grant,

I'm not sure about SNMP Traps, but normally the following OIDs are used with the Custom SNMP Monitor to monitor various items:

For Compaq/HP Servers:

• 1.3.6.1.4.1.232.6.1.3.0 - System status
• 1.3.6.1.4.1.232.3.2.2.1.10.6 - Raid status
• 1.3.6.1.4.1.232.3.2.2.2.1.5 - RAID accelerator status
• 1.3.6.1.4.1.232.3.2.5.1.1.37 - Drive condition
• 1.3.6.1.4.1.232.6.2.6.7.1.6 - Fan speed
• 1.3.6.1.4.1.232.6.2.6.4 - Fan status
• 1.3.6.1.4.1.232.6.2.14.4 - Memory status
• 1.3.6.1.4.1.232.6.2.9.3.1.4 - PSU status.
• 1.3.6.1.4.1.232.6.2.6.1 - Overall thermal status

For Dell System:

• 1.3.6.1.4.1.674.10892.1.200.10.1.4.1 - SystemStateChassisStatus
• 1.3.6.1.4.1.674.10893.1.20.110.13.0 - AgentGlobalSystemStatus
• 1.3.6.1.4.1.674.10893.1.1.130.4.1.4 - Disk State
• 1.3.6.1.4.1.674.10893.1.20.130.4.1.4 - ArrayDiskState
• 1.3.6.1.4.1.674.10893.1.1.130.1.1.5 - Controller State
• 1.3.6.1.4.1.674.10893.1.1.2 - Array Manager Global Status

Hope this helps.

Chris Foley