I am trying to onboard the Cisco Catalyst 8200 IOS XE 17.12 devices to the environment via SNMPV3 but it is failing while trying to test out, can you please help me to get it resolved.
TIA,
Purushottam Rathi
Do you have other devices like this already in your Orion environment? Typically when I've seen SNMPv3 imports fail it is because it is not configured properly on the device itself. If you have another device you can compare it to, that may help, otherwise be sure your network admins are properly configuring SNMPv3 and relaying the credentials correctly. Check out this guide for more help. SNMP v3 configuration and troubleshooting in Orion
Yeah we do have other devices that are onboarded with SNMPv3 but having issue with some of the devices, will compare the settings on the device level and check
Also I does read/write creds also requires to onboard the devices with SNMPv3?
Typically you don't need read/write, but if the device already has that configured, then you may have to use that. If you have both read-only and read/write SNMPv3 credentials configured on the device, the SolarWinds Platform may need read/write credentials. For example, read/write privileges may be required by Engineer's Toolset or NPM/NCM, for changing an administrator status on the device.SNMP credentials for the SolarWinds Platform
let me check the configuration on device end.
