toms003

hi all, i had the same situation. rebooting the router send the data to the server. i.e 877 router. i have to reboot the router everytime to get the data. is this the case?

i do have the NTA installed

hi elomega, thats the solution.flexible netflow.i did come across taht one. because i did have the same problem. trying to configure our 877 on these suggestions

hi all, i have configured the netflow on interfaces on the cisco router.(its a vpn connection to our head office)so configured on the vlan and also on the port. the show command shows the data but its not reaching the server. any help?ports are open. the orion npm is working on the server. all the dash boards like cpu,avg…

hi elomega, is your remote router a vpn tunnel? try a laptop with a real time netflow analyzer on the same vlan at the remote site and see if the data comes through?if it does,it will be the vpn config that causing the issue

HI All, this is the version on my 877.. Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(6)T6, R ELEASE SOFTWARE (fc2) Copyright (c) 1986-2006 by Cisco Systems, Inc. Compiled Fri 08-Dec-06 22:44 by kellythw ROM: System Bootstrap, Version 12.3(8r)YI3, RELEASE SOFTWARE System image file is…

Hi I had the same issue but when rebooted i got the data. the data comes only cisco rotuer(877) is rebooted. still looking for a fix...

hi all, by rebooting the router and removing the node from npm server the data came through. but its not constant though. i have to reboot the router to get the data every time?any idea?

thanks for that. when u say device bug,you mean the IOS may be have some issues?

HI Mcbridea, thanks for the reply. The router is showing its exporting. but analyzing the file capture, cant see anything recieved on the netflow server on that port.nothing is blocking that port though. router#sh ip flow export Flow export v5 is enabled for main cache Export source and destination details : VRF ID :…

 Hi Dwyane, thanks.the main problem is my cisco router 877 wouldnt recognise the ip flow ingress or regress or route cache command on fe2 or fe0 which are the 2 physcial interface. the ip commands listed are below.there is no ip route cache or ingress listed.pls see below interface IP configuration subcommands: address Set…

thanks freemen. method 2 was selected i have changed to method 1. will update you how it goes.thanks tom

hi it didnt work..comes up with error" a connection couldnt be made to the specified device. ensure you have the network access to the device and credential are correct". all the info is correct still its giving error.

Hi I have e-mailed the details to support team. have not heard so far. tom

no they are not reflecting. i installed the sloarwinds 9 and i am using database manager option to restore the back up file from the old server. The backup database is called netperfomon.bak when i restore the wizard says complete but doesnot make any changes pls help

hi thanks for the reply. i did that. still it saying restored but cant find the database.also deleted the database.

will do thanks

Hi Bishop, So you have identified this as a problem with other users? you mean i have to run the explorer on a compatability mode for this purpose on pcs..

hi jan, i dont have that message. i have data after every time i reboot the router. its not automatic though

Hi hutcha, Thanks. we have used switch port command on the interfaces,so we have vlan1 configured for the data. .ie fa0 as vlan1. so i have configured the netflow command on vlan1. the command wouldnt recognise on fa0. on vlan1 its taken all the commands and when i look at the show ip flow and cache its giving the desired…

thanks for the replies. i have a doubt now. router is 877 and its a site to site vpn and we have the vlans on the router. so ip route-cache flow command should be excuted on the vlans or on the fastethernet physical interface. on fe0 the ip route-cache command doesnt work. but on the vlan interface the command did work.…

i am just downloading the configurator. do think i need to do it on vlans as its a site to site vpn...

can anyone help plsssssssss