tigger2

Awesome I just upgraded to IPAM 4.3.2. on Wed. I'm thinking of pulling IPAM out of "the borg" install I have just like I'm thinking pulling out UDT. if nothing else so we can turn up the scanning frequency and also so it doesn't get impacted for NPM upgrades, etc. It's not tightly integrated with the other products so it's…

If it helps: I have all my stuff (except the database) running on 1 server: SAM 6.1.1, QoE 1.0, IPAM 4.3, NCM 7.2.2, NPM 11.0.1, UDT 3.1.0 and I took about a 10-20 minute outage when I ran the configuration wizard for just the web site. Most of the time appeared to be a step where it says something like "Optimizing…

Not sure about the question, but SAM has an "unlimited license" option, I believe it's the "ALX" version. It's the one I'm using. Here's a link to the docs SAM licensing model detailed

Update: I gave up on how to remove the cert properly and just decided to regenerate the cert first. Second method attempted below (and failed): 1. Deleted the old "<my exchange server IP here>_Solarwinds_Exchange_Zero_Configuration cert from the certificate store on the Exchange server. 2. Re-generated new cert from…

Try this regex. It probably has some bugs, but if it works, it's a start! my ($timeServerTime,$drift) = $var =~ /\s*(.*)\sntpdate.*offset\s(.*)\ssec/;

Thanks for the info! If I had test systems to test it with I'd be less jittery about trying it out in production. It's nice to know someone else has ventured out first

I've already tried the steps in the second link: no change I'll see if I can give the steps in first link try next week. Thanks for the links!

This might help? Alert on Nodes that stopped responding to SNMP The initial post is using a very similar query and the first commenter, adatole indicated there may be issues with it because: "...I'm not sure if it was because the pollers were getting behind, or because LastSystemUptimePollUTC wasn't getting updated even…

"in this situation how will you create the alerts?" I'll try my best . The other replies below are also good ideas. There's generally not 1 way to do this, which means you may choose 1 way and then realize you have to do it all over later as more information becomes available from users/customers. Once you get the hang of…

ahhh. Well at least it's by design then Edit: In fact, if I look carefully...I can see it says "Alerting Thresholds" right above the block of these settings. I guess since these mirrored the global settings, and those settings are the ones that change the node colors, I "overfigured" (I did not assume ) that these were…

- Changing the "Gropup By" didn't show the Syslog Summary - I rebuilt the website (as suggested) and it worked! Thanks!

I'll be finding out very soon as I'm upgrading tomorrow. Given nks7892's issues I'm not too hopeful, but I would also assume that an issue this observable would be happening to others so maybe there's something common amongst our environments that's not common for everyone else? nks7892 mentions it occurring with APE's,…

">adatole, below, wrote up an example on how to create a batch file, put some commands in it, then have SolarWinds execute it as an alert action. Follow those instructions to get started. After that is shown to work/not work, then it can be determined where to go from there.

Awesome , thanks! I haven't upgraded yet to use the web console for alerting, but I'm going to get there very soon.

I'm running into a similar question. I'm not highly knowledgeable on "the network side" of things, so hopefully I'm not going too far down the rabbit hole for something obvious. To be clear on how setting up a multi-subnet failover works: The only method supported today is to use a "virtual hostname" which is a DNS…

Nope . The only thing I came up was: Make up a prefix to put in front of all the metric names I *don't* want to see so all of those metrics get grouped together and drop to the bottom of the table. I used something like 'z_raw_'. From the screenshot above, I did something like: ReceivePower -42.8 VectorError -35.4 ...…

Update: Node was rebooted. I removed the "AppInsight for Exchange" template from the server, ran the Database maintenance tool (I was just compelled to do this...maybe it would clean up something), and then I re-added the template and re-ran the Configure Server wizard. Same SSL error. I'm looking into how to properly…

I haven't tried recycling anything, I was hoping a reboot would be scheduled soon , but I'll see if it works. Otherwise I'll open a support case. Thanks for the help and the log location!

I have set up more than that in the past so, if it helps any to have a point of reference: Using the AppInsight for SQL template I had 20+? database instances, with hundreds? of databases inside the instances. On top of maybe 30-40 custom monitoring templates (average 2-4 components in each...not a lot per template but set…

yaquaholic , I would also like to mark this as "Correct" also but it was my bad not to check the different GET types even though it was probably implied from previous tests I did that I would. The site won't let me mark 2 correct answers in a post, so I marked the other as "correct" as others searching would find all the…

Tried it, same result I browsed "up" the MIB to: 1.3.6.1.4.1.20542.1.4 which is airlink -> general -> ModemType and get the same "OID not supported" error. I added a .0 => 1.3.6.1.4.1.20542.1.4.0 and got the same result. It looks like I can SNMPWALK the entire MIB, but I can't get the UDP tool to indicate any OID is…

I just thoughts of a question, and maybe you could offer some insight Scenario: I have multiple products installed on 1 old server: NPM,SAM,NCM,UDT,and IPAM. I have everything using 1 database no a separate server I had planned on delicenscing and uninstalling UDT,and IPAM on the existing server, and installing/relicensing…

For "Issues with online installer vs. offline installer" question: I don't have anything definitive I can copy/paste and I was in a rush because I was having issues but what I recall was the *offline* installer seemed to have more "failed" checks (tests that were red), so it refused to proceed further than the tests page.…

Based on what you're saying...and adding info on what I'm doing to generate the CSR: When generating the CSR (we're not renewing it), we're choosing a template someone on our CA side created (and we are using MMC to generate the request, not IIS). In the template there are tabs for adding a private key but they are empty…

That's good to know. Thanks!

Update: The "packet loss" issue in my post immediately above is "fixable" but apparently not part of a published workaround, patch, or Thwack post. I opened a ticket and after sending some screenshots, analysis, diagnostics, Wireshark dumps, etc. SolarWinds support was able to stop the flapping from happening. I'm not…

This new failover setting is a nice thing to have, but it probably won't help my main issue that I have been needing retries for: When I see Orion try to send a *lot* (maybe 10? 20? 100?) emails in a short period of time to many different people/groups because of a large outage the Exchange system stops allowing me to send…

Update: I upgraded and my Universal Device Pollers, Syslog alerts, and SNMP alerts all "migrated" without the need to export/import anything for them. Thanks for the input above!

It's a way of knocking a post "up" a little (bumping it) so it will not get lost or pushed down in the queues amongst all the other chatter in hopes people will provide more (or any) information. Having said that: We don't have Orion in a DR state. The best we have come up with is to put it into our DR site and run it from…

If it helps anyone... I have this in a SAM template inside a "Windows Powershell monitor" component. The template is associated with my main poller server (this won't run against a remote server, but you could probably find a way to do it). I have it scheduled to run at 10 minute intervals. The code runs and produces 2…