tbelanger

I would really like to be able to do this as well in Network Atlas, but as a work around I found attaching a label to the interface and using these variables listed below to be a quick workaround. Out: ${Outbps} In: ${Inbps}

Do you have accounts that you are authenticating with smart card using an AD group ? I have no problem with single user accounts, just with trying to use a group.

I just got done downloading the 2.6GB file the previous installer told me to download. Even though both files are the same file version "1.3.1.493" but one is 2.61GB and the other is 656MB. They are not installing the same Hotfixes. If anything, the larger file is not installing the latest versions. The first image is the…

Sean, It isn't that its not working, it just "fails" to reprompt again. I usually have to close the browser completly and reopen or clear the ssl sessions. Also, in an environment like ours everything is heavily locked down so most options other users might enjoy changing, we would be unable to do so.

I am getting this exact same screen. Just downloaded the latest offline installer "Solarwinds-Orion-HotFix-2017.3-OfflineInstaller.exe" 656MB Product Version 1.3.1.493 from solarwinds same as the above screen shot. Copied it to my server it is is telling me that it can't continue because no internet connection detected. It…

Thanks for the input chris. I was actually posting entire blocks of the interface configurations. For example, I was using a config for a 48 port switch that had portfast,bpduguard, plus other stuff. So each interface has a lot of lines associated with it. I am certain of that not being the problem, but I could understand…

I have experinced a similiar issue with using internet explorer. Just dosn't want to prompt for the smart card again. Chrome seems to handle this a lot better and prompts me each time.

It would be nice if you could rerun the discovery wizard on nodes that already exist within NPM without having to rerun the entire discovery again.

Chris, That is exactly what I have been doing...Also it not having port-security is not the issue. I visually verified in the config on the interfaces for the result I was expected to see and ssh'ing to the device to spot check its configuration. I believe I figured out a workaround however. I used \r\n and that seems to…

Thanks for taking a look at this. Taking a look back at my post, I am sorry if it came off as hot headed. I was really frustrated having to download multiple 1 to 2 gigabyte files only to be told by the installer that it has to go out and download more stuff over and over. Again, thank you.

Sankeyj, I have smart card authentication working with single user accounts in AD. My problem is using AD groups to authenticate against. I had a ticket open with solarwinds but it pretty much died on the vine...

I am not trying to use nested groups. I have a singular group that has my account in it that exists within our OU structure.

Thanks, this is just what I was looking for. Also, not all of my switches use power-stacking (2960S) or on switches that do they wern't setup that way for whatever reason. Anyway to also disable power stack monitoring as well on specific switches?

Thanks, this is exactly what I was looking for!

Thanks for this, I will defiantly be looking at this to see what kind of stuff I can do!

I have been having problems with being able to send pdf reports via email with smart card authentication enabled. If it is disabled and regular username/password used then the email reports work fine. Basically the email message just has this in it when it runs Unable to retrieve url: https://<server…

Tony, When you are logging in with a smart card, you do not get this username/password login page.

I was able to get the smart card authentication working with these steps, except for one additional step I had to do. In IIS Manager under the main server, if you click on authentication there is another item called "Active Directory Client Certificate Authentication" that I had to enable on my server for the logins to…

I don't think you can create new tabs. What I ended up doing was create a new view called 'Maps' and added it to my home toolbar. Within the specific view I enabled the side bar for each different site and added the 'maps' resource to each side bar entry. This way on each of the side bar options I had the specific map…

One thing that I've discovered is that most of the nodes experiencing the issue where set to the Solarwinds native node details poller. Awhile back I had made some custom pollers for various devices since I did not like how the model number was displayed, for example I would prefer to see 2960S-48TD instead of just saying…