Comments
-
Bump
-
Please add this feature. We have equipment that changes mgmt IP based on which processor card is active and standby.
-
We figured out why our alerts were not integrating with WHD. WHD is using a self signed certificate and port 443. NPM is not recognizing the cert and not sending the Alerts. We changed everything to port 80 and it worked but unsecure.
-
I did find in the VMAN 8.2 admin guide that Server 2019 is not supported. https://documentation.solarwinds.com/archive/pdf/VMAN/VMAN-8-2-Administrator-Guide.pdf
-
I am having the same issue with a Cisco ASR9006 each time a refresh the list resources screen we see more or less interfaces but never complete list. We have already verified snmp settings are correct in the device. It is being polled correctly in another monitoring software with no issues. We also did a full walk and all…
-
I have the same issue. Support told me the "NetTcpPortSharing" service needs to be enabled and ports 17777 - 17778 should be open between your App server and WHD. I fixed both issues and mine still is not fixed. We have done wireshark captures between the servers and see no "Alert traffic" on those ports or any others. I…
-
We are having the exact same issue. We are currently running the newest software version. We have to make sure reports are scheduled at least a min off of each other.
-
Hi, I know this is late and you prob have already figured it out. This can be confusing, long story short the Client tick is selected per ticket. If you want it always on you have to go to setup-->Tickets--->Options and about 3/4 of the way down the page you will see. Default Setting for E-Mail Recipients (No Tech Group).…
-
It works fine but you have to create Custom Device Templates. I was able to download one from thwack that a contributor did for a 5150 and modify it. We have close to 100 Ciena devices being managed with NCM right now.