skymeat

Comments

  • Okay - So pretty much drop the 'snmp-server community <string>' line? snmp-server host inside 10.10.80.9 community <string> no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart
    in PIX 515E Interfaces Unknown Comment by skymeat April 2011
  • Same thing here.
    in Tell us your "Unknown" devices! Comment by skymeat May 2011
  • I'm a bit confused then about how NCM is retrieving configs then. If I look at the Cisco Command Template the DownloadConfig line is: <Command Name="DownloadConfig" Value="Show ${ConfigType}"/> So is it just capturing the result of the show command? On the Tippingpoint the correct show command would be: #show configuration…
    in NCM and Tippingpoint Comment by skymeat May 2011
  • So I was able to test this - and it looks like it is working as planned. Seems like a cumbersome system, but it's working.
    in Dependencies and Groups: Am I on the right track? Comment by skymeat March 2011
  • Can I get at least a hint here? We don't have the resources to set up a test environment to mirror this, short of staff and time, and I really don't want to wait for the t1 to drop sometime to see if it works. We've got 13 branches like this, and the data center is much more complicated. Any input would be appreciated.
    in Dependencies and Groups: Am I on the right track? Comment by skymeat February 2011
  • I was having the same issue - We have several routers with 2 ip's on the same interface, NCM had one and NPM the other. Once I got that sorted out they showed up fine. 
    in All Nodes Not showing up Comment by skymeat May 2011
  • Trace looks like: 5/10/2011 8:00:21 AM] --> Main Menu - [Midspan PoE Device] [5/10/2011 8:00:21 AM] --> [5/10/2011 8:00:21 AM] --> ------------------------------------ [5/10/2011 8:00:21 AM] --> [5/10/2011 8:00:21 AM] --> 1. View menu [5/10/2011 8:00:21 AM] --> [5/10/2011 8:00:21 AM] --> 2. Configuration & maintenance menu…
    in Menu Command Template Help. Comment by skymeat May 2011
  • Beautiful! That did the trick. thanks, Skymeat
    in Transforming Poller Result to a Word? Comment by skymeat April 2011
  • Okay - So I re-ran the discovery and the servers, network gear, etc..showed up with correct machine types, interfaces, etc.. Nothing changed, except re-running the discovery, and having the Engineer's Toolset service started.
    in Unknown Machine Types Comment by skymeat March 2011
  • So I got mine to download the config: TippingPoint-1.3.6.1.4.1.10734.1.3.6.ConfigMgmt-Commands <Configuration-Management Device="TippingPoint" SystemOID="1.3.6.1.4.1.10734.1.3.6"> <Commands> <Command Name="Startup" Value=""/> <Command Name="Running" Value=""/> <Command Name="DownloadConfig" Value="show configuration"/>…
    in NCM and Tippingpoint Comment by skymeat May 2011
Avatar