sja ✭✭✭✭✭

Hi Not big on cisco but we like to see: HW CISCO-ENTITY- CISCO-ENVMON-MIB: Routning BGP OSPF-MIB Flaps IF-MIB:link Just take everything for each type Cisco you have and start filter out the noise .. Tips and Tricks for Managing Traps and Syslog in Orion NPM If you have alot of syslog /traps I would set up kiwisyslog as…

‌hi the options are 1.Load balance with F5 How to load-balance Kiwi Syslog servers‌ 2.There are linux base syslog that can handle much more https://www.balabit.com/network-security/syslog-ng‌ 3. Optimize what is send to the kiwisyslog from the devices.

‌Thanks what npm ver. is there ?

Yes you can the “out of the box“ Juniper junos template works for SRX

Hi ash81 Try that Reporting on ip helper configs

I have the problems with routers in my SNMP domain ....That topology don't see my AE link interfaces That simple feature "utilization rate by colors map" was somehow tied together to the new topology discovery not good.... /SJA

How about using SMS gateway ?Remote monitor that will work even if the power is down... That will be easier then moving the DC .. Server Environment Monitoring System Remote Network Sensor Alarm https://m.youtube.com/watch?v=DolK1KNnIWo

Hi Try that one its should work.

Hi paynecave​ Solarwinds does not hate Brocade or any other Vendor (but they have quite a lot of Cisco fans boys) Does Brocade has a feature request for native hardware support? If not make one... I will sure vote ...

${ReverseDNS} I can use that because ${ReverseDNS} in that case. Re: Looking for list of NCM variables

Great tool we have NPM for many years but use some home made scripts for backup. What we gain form NCM consolidation of backup better visiblty visibility on chages better network security

Hi I like to say it "dependent" on how many changes that type device has.. I backup every day devices that has daily changes. I backup every week devices that has not 1-2changes per week... I backup 1 time devices that we don't change. I also backup changes in HW like cisco "show mod" Re: How do I view the Backed up…

I had some problem with the out of the box poller to my Juniper MX. It's something with Junos and snmp bulk from Junos 16.x something I use this device poller works fine. Juniper CPU & Memory (rev 4)

‌hi all my junos base nodes use the out of the box template. can you use the same connection user name and password with putty? can you run that putty session from the ncm server?

Hi kpmarcin​ I know that HerrDoktor​ came to those numbers I don't see why 30,000 and not 1,000,000 (if i dont backup every node every day) It's should be how many jobs you run per X time to get the NCM engine capacity

Any one ? Cisco Prime can do that. Any way find out if there is duplicate IP ?

Hi There are 2 ways 1. API GitHub - solarwinds/OrionSDK: SDK for the SolarWinds Orion platform, including tools, documentation, and samples in Powe… What I use to some CP 2.Alert that run one a day and look for that missing CP ( easy way ) That alert look for Node with CP=CPE and "Owner" CP is empty

Hi I don't use that feature but there is "Auto Dependencies" that should use to that... Automatic dependency calculation

Hi I think we have the same issue on NPM 11.0 ticket number 668168

any one ? How do I make IP octet to PARAMETER

I just love the control it give you on what poller should be on and what off. better control = much better scalability of the system.

Hi I will try to config new or extra Community String: to the metaswitch box. I will cheack that there isn't any snmp access list or FW that not include your NPM IP address. and if all that is not working call solarwinds support. /SJA

Hi Every time someone ask about Orion syslog or trap .. I ask back why they don't look at Kiwisyslog 250$ and it do trap syslog and windows event better then Orion ... then forward the importent stuff back to Orion Here is the filter on the kiwi ..

‌hi I found it much easier Not to tie the element to alert. group is not necessarily . That video will show you how to leverage CP https://m.youtube.com/watch?v=JIvXXX2wWaY

Hi Those ports are for Solarwinds internal and API +17779 to tool box integration. Devices that solarwinds NPM monitor need ICMP /SNMP/TRAP/SYSLOG /WMI http://www.solarwinds.com/documentation/Orion/docs/SolarWindsPortRequirements.pdf

Hi shoog​ I will use a NCM job with 2 commands http://oriondemo.solarwinds.com/Orion/NCM/Resources/Jobs/JobsList.aspx 1. show log | match 10.74.144.11 ....... 2.set system syslog... commit comment “no more log from netpath” Send mail..

You just described the pain of SNMP... Just 1 oid miss placed and you can’t do anything with that software... Snmp is on the way to retirement. RFC 1213 - Management Information Base for Network Management of TCP/IP-based internets: MIB-II I hope the PM start looking into netconf that the way to go will work with any JunOS…

that got me puzzled 2 ..if it's necessary so why it's possible to upgrade Sam from 6. X to 6.3?

EX2200 and EX2200-C are there for you..

I second that question...if that feature works like we hope... I hope we get a full lab out of this ?Dez​