sja ✭✭✭✭✭

That feature is "game changer" that will close many HP NNMi servers... like to see that soon..

Solarwinds has so much confidence in NPM. Just keep backing that with features support and good customers service.

Look at that thread .... https://thwack.solarwinds.com/thread/121861 1.You get the base features and advance alerts integration (that clean out one of the biggest issues with NPM). 2.The full version get Graphics and tagging ...

I have quite "allergy" to vendors owen E/NMS software .. Any how NETCONF support is the what I miss from NCM to flush out Juniper "service-now" permanently from my net so "please with suger on the top" vote Happy days!!

Hi Mermel If you combine all the FR that has something to do with improving that area in NPM you will get around 500+votes!!! Its important to keep "nagging" ....this is maybe the biggest challenge I have with Orion platform. I think I found a thread probably from NPM 8.x its 10 years old the question is the same....

Hi I like som "feedback loop" from NCM. that I truly missed.. That could be IF that is now true =show that command" If that was Juniper device I would run "commit check " and dispaly the output. I don't see real validation on what I push "real time" ..

I LOVE the kiwisyslog transparent forwarding feature Thanks for that!! Syslog and Trap Messages are Slowing Down my Monitoring Solution. What Would the Geek Do? - YouTube Explanation with sound effects!!! Please adatole​ try to push that FR With that in your hand no more "SQL alert digging" just alert on CP change =TRAP…

No problem to get CPU, Memory I sure like to see native hardware health Hardware health OIDS - SolarWinds Worldwide, LLC. Help and Support

Hi @"rosab" Please read the comments under the feature request. thwack.solarwinds.com/.../feature-request---support-for-hp-switches-swi-filename-for-firmware-repository

Yes make a compliance reports that looks for that specific interface with vlan XXX When you have a report that match Then use the remediation part in the end of the rule. Please be careful with the remediation part (test before push it )…

Hi Sound like a function for snmp trap or syslog .. By the way I find alerting the ISIS neighbor status redundant ...because it's directly running on L2 It's good enough to monitor interfaces status specifically if that p2p ISIS between 2 devices...

Hi Try to not mixing regx with strings. Don't mix positive and negative in the same search. Clean up that search and look for shutdown interfaces.

Hi I will say take @"TerryHarding" advice. Any how NCM is not optimal for that. The lack of feedback/control can be a disaster..

Hi @"avivi" Google is a friend :-) thwack.solarwinds.com/.../174616 https://documentation.solarwinds.com/en/success_center/ncm/content/ncm-command-template-commands.htm

Hi You can add the destination as unmange device like 8.8.8.8 just to get alert if Solarwinds can not reach google dns server.

 Juniper Devices-1.3.6.1.4.1.2636 with show chassis hardware Take a look on that template. That will backup your hardware inventory just like CLI config. The big + is you can search for hardware inventroy and you can see when harware was replaced just like a config change.

"Yes you can" You can make a discover job that will add the device/switch You can make alert to add Custom Properties like Site/POP Address SLA https://www.youtube.com/watch?v=Db88hMZz2lc https://documentation.solarwinds.com/en/success_center/orionplatform/content/core-automatically-add-discovered-nodes.htm…

Hi It could be that you can change some where deep in the advance web setting. If not You need to make a ticket to support and tag it to NPM PM manger...

Hi I do not think you will get much out of NCM regard advance firmware updates & compliance. I know something should come with compliance but it still after 5 years feature request.. If you need a strong Checkpoint support take a look on https://backbox.com/ Br Shay

@"chad.every" that is very cool as match multi vendor will keep the platform relevant. 

We use BGP to control that the path is working on both lines.. 

Hi Yes I just replace the node re use the ip. 

Cisco C9300LM-48U-4Y 1.3.6.1.4.1.9.1.2804 recognise as C9300L Cisco C9300L-48P-4X 1.3.6.1.4.1.9.1.2804 recognise as C9300L NCM can recognise that its not the same type switch

Hi You can report on Connection Profiles I think its OOB report. NCM will allow you to delete used profiles..

Hi Not a cisco fan boy at all .. I expect you should mange does with cisco DNA center? If not Solarwinds platforms support standard like SNMP and SSH Syslog Those devices are supporting those protocols from that link. www.cisco.com/.../datasheet-c78-737277.html

Hi Try to run other crypto ip ssh ver 2 crypto key generate rsa modulus 2048

Only SSH 

Hi Dal I have no problem backing up Cisco 9300 IOS 17.9 with the normal Cisco profile. Did it ever work with that device before or it stop working ?

Go to that link and add the type and the OID Tell us your "Unknown" devices! Or call support that will add it with a internal ticket ...any way it will get update in the next release.. 

1.3.6.1.4.1.9.1.2959 = Cisco C1000-16P-2G-L 1.3.6.1.4.1.9.1.2872 = Cisco IE-3400-8T2S recognise as "Cisco" only