sja ✭✭✭✭✭

Hi If the ospf ID = the IP you use to poll the router in solarwinds use ${AgentIP} IF not Make a CP for x on each OSPF node https://documentation.solarwinds.com/en/success_center/orionplatform/content/core-creating-a-custom-property-sw1289.htm documentation.solarwinds.com/.../ncm-understanding-ncm-macros.htm Please TEST…

The "ADVPN" is just regular interface.. you can monitor that + BGP or OSPF will let you know if you lost connectivity to the remote site. 

I just do not get Solarwinds development ...is that new kiwi for Enterprise ? If yes it need to work with minimum AD...no one will be allow to take that out side test lab..

Yes Use compliance report to remediate from ip http server to no ip http server

Please vote up [mention:ef74cb5b08f946979b6d7a5119168667:fb5d84b10a5745448a7a45dafc1faa43] 

Open a ticket with support they will tell what is missing from the extreme to display the same info you get from Aruba & Cisco.

You probably need to open a support ticket

Hi I think there is support for Juniper EX2200 and Cisco 29xx. It's some kind "one of" deal... no work to keep update other models or new vendors (I know about more switch vendors :-)) I think you need to try find the PM and ask for "roadmap" ..

Hi Download that poller it will let you see the OS version thwack.solarwinds.com/.../2959

Hi Take a look on the Network Discovery. Here you can make some kind of profile that matches regex or specific string.

Hi Good luck with that ...until they will do something with Python support ..here my "work around" That device template allow you to "backup" the cli output from cisco device there is one more for juniper.. That allow you to search the device serial just like any other compliance search..…

Try this 1.3.6.1.4.1.9.9.388.1.2.2.1.3 Description: "The time (in hundredths of a second) since the chassis device was last re-initialized." OID: 1.3.6.1.4.1.9.9.388.1.2.2.1.3 MIB: CISCO-VIRTUAL-SWITCH-MIB Type: OID_TYPE_TIMETICKS Access Type: ReadOnly Variable Type: None Status: Current

Thanks bshopp I hope SW will stop with those "one of" features that work with specific vendor WLC and not the rest ..

Open a ticket and update the thread we sure like to know if it safe to move to that release

Hi dclick I quite sure that the orion platform (NPM/NCM) does no support what you looking for. I think the right way is asking the PM for some roadmap info .. If I was in a "clean" Cisco shop or any other vendor that has it owen EMS system...I will take those features with the vendors

Yes you can make a disco job that run every week and automatically add new switches and new trunks in this print screen I add only trunk port that are up and has desc. with AP or Link

Hi IMHO just use Compliance Reports to locate and replace those statements .. https://orangematter.solarwinds.com/2018/05/15/amp-up-your-network-configuration-and-compliance-with-solarwinds-ncm/ IOS SNMP config and SNMP location ****************************************************** snmp-server community "text"RO…

Hi isnt that condition will trigger red yellow alert on the device?

I run on 2020.2.6 and did not see that but.. could see many problems with 2023/2022

Please open a ticket with support and update us with status..

Hi Are you running on 2023?

Hi I never hit that problem ..how many cisco devices are NCM monitor ? Can you work a round it by duplicate the compliance and use MachineType ?

Hi Its under Policy where you mange the filter 

Open a support ticket sound like they poll the wrong oids

Yes do you have something close to that? 

Hi You can find it here ..only Nortel can do that CTRL+Y.. ${CTRL+Y} CTRL+Y https://documentation.solarwinds.com/en/success_center/ncm/content/ncm-understanding-ncm-macros.htm

Hi Solarwinds ecpect that Ciena WDM will work with Mib II.. https://www.ietf.org/rfc/rfc1213.txt Make sure that Ciena has SNMP usage counters on the optic layer it could be that Ciena do not do that..

Hi Make sure its not in the release node bug list... and if not open a ticket with SW support ..

No its not ..just ask support to fix that.

Hi NCM is not designed to monitor servers hardware I think the Sam module take care for that.