shaun_9999

All well and good - is this a problem with my end, or the Oracle end. I've checked to make sure that traffic is going to at least the exchange (there is an any/any rule in place on the solarwinds vlan) which indicates it might be getting blocked at the Oracle boxes end. That makes no sense, the Oracle box is in our…

I have an action to place a log in netperfmon. Since this has been implemented (21 days ago) we have not received the log to capture this event. Which I why I know that the alert isn't being triggered. I also implemented it on the mits alert, which is why I know it was triggered. The SMPT is the same (we have one SMTP…

At the moment, my budget only allows for one poller. It's what we used initially in our terrible spec setup and it seemed to kind of do the job required. A while back I spoke to Orion/solarwinds and they said that for the number of nodes/elements we have it would be perfectly fine to use one poller, maybe just increase the…

That's the one thing I forgot. When I initially checked the server, it was varying between 60 - 80% (which around an acceptable level for the work the server does) It's not on a template, I simply added the service when I added the servers.

Do you have a graph that you can use for your temperature sensor?

Deep in my heart I just know I will have to start with a blank environment. If I migrate anything over that is from historical data it is going to cause all sorts of problems and I will be in the same boat that I am in already. I had no training and just kinda picked it up from doing and reading. I feel the last six months…

Which tells me that you can't trust solarwinds. Or another factor of solarwinds that I am not aware of. I would do diags and send to solarwinds, but last time I had to apply a patch solarwinds recommended that would have fixed something, it broke my server and then I spent an afternoon doing config after reverting the…

The thing to me in my weird brain is that the option is not standard for all top nth. So the top 10, top 25, top xx. It makes sense if they made all of these option universal. Which, now that I think about it, I might have bl00dy answered my own question as to why I cannot edit something: The option might not be there on…

Is there a free way of doing this? Such as using a command/script in SQL to action this?

Seeing how much space if left in a backup server drives. But it doesn't show it for one server.

Thank you for your advice. I think I am being too specific in my searches when I actually run an internet based search.

Looking at the postmaster service, it appears to take up almost 600 + licenses by itself. Is that correct? That seems a little too much.

So this is the some of the processes that are running: But I cant seem to find some of them (hint: porsgressql) on solarwinds.

So this is the results from the list of processes on a server. This is what I receive when I add a component.

Ok, so I will explain in the form of pictures. We used to use the following redhat services for some Linux servers we had. Because we did a redhat upgrade, all of the processes have changed. I have checked with redhat themselves (they couldn't assist me) I have checked the servers and hoped I could have seen something that…

You beautiful, beautiful man. That actually fixed my problem. I think there should be an easier access via the node itself, rather than via the main settings. But still, it fixed the issue I had. If only you had experience with LEM...

I am 99% certain (I would need to look at the change that occurred earlier this year) to see if it's what we tried. We, as a company did a few hot fixes to no avail. My most recent option is to see if it reacts the same way with the most recent SAM. If this fails (I am in the final parts of this change now) and we have…

Nope. The information service was stopped, but that's about it.

I'll give it a go next time. I always get this error: So I found this - SWIS discover Interface Error I'll give both a try and see what works. Do you know why the .net framework becomes full?

So, I have deployed the OVA (the 1st part) configured the server. Then ran the LEM reports agent on my solarwinds server, configured that to see my LEM reporting server (which finally worked after not having special fingers and typing in the wrong IP address) But then it states that I would need to connect to my reporting…

Something is really wrong this time with the upgrade. It used to be a reboot/restart services would start it back up. But this time I had to rebuild the entire site again.

That's the sort of thing I am looking for. I suppose I would need to understand the intricacies of my estate to understand what is user driven and what is a process that is going rogue. Now all I need is someone to help me with the drive issue and boom, I will be a happy bunny. But thank you for your assistance. I was…

I was thinking this last night (I have been burning the midnight oil over the last couple of months. Which is very rare for me as I am generally very lazy.) and I was thinking: 'How can I make things better than what they were/are. We are running six applications: NPM NCM SAM WPM IPAM LEM And I just want more from it. But…

'm going to sound dumb here - do I run this within solarwinds, or, do I run it within powershell? Looking at the script, I guess I run this in solarwinds maybe???????????

Ok, I might have confused everyone. Basically I need to replicate this in a new environment. But I have no idea where the source data is being polled from.

I sadly have a little history of consuming a lot of alcohol and then keep drinking it. Problem is that my life was so structured for such a long time that simply I am now in uncharted territory. Doing things that other people do such as going out and socialising seems a very daunting task. Plus chocolate is a drug and I…

I am unsure, but I think that a filter is stopping .png files being sent as I sent a picture of what I receive on my screen. When I try to change the individual properties on a node I only get the following threshold options: CPU load Memory Useage Response Time Percent packet loss. I cannot see one that says ‘disk space’…

I added this prior to the upgrade: NPM 12.3 upgrade issues As we too, have always had issues with the upgrades. So I thought it would be best to reach out to the community. The ones that have done the upgrade.

I'm a little confused as to how my problem is answered. If anything it's not more unstable and failing every 24 hours. It's technically 200%(?) worse than what it was two weeks ago.

That didn't fix my problem.