Comments
-
Use the Legacy Report Writer on the Solarwinds Server and use the SQL statement you have. (2012: Report Writer 2008: Start Menu> Solarwinds Orion> Reports> Report Writer) * Create an Advanced SQL Report and use the SQL Statement (I removed the NodeID so that this can be used on every Node Details Page): Select…
-
Please See this KB on Interface Bandwidth: http://support.solarwinds.com/kbase/ProblemDetail.cfm?ID=1509
-
Use NCM, NCM with SQL installs SQL express. Express has a 1GB Ram limit and 10GB database limit. You will also need to install NCM 7.5.0 before moving to 7.5.1. Download will be in the customer portal, you can select the versions. 1Upgrade Network Configuration Manager from version 7.3.2 to version 7.5.02Upgrade Network…
-
In the Universal Device Poller, expand out the Show Advanced Options and change the Format to Enumeration and the select Map Values. Make sure that the Values are right and select OK and then Select Next. When the OID is polled, it will now show the text instead of the number.
-
Since the SNMP Service Restarted, the Uptime counter was reset, which is why the Server was shown as rebooted. This is normal behavior. We monitor the SNMP System uptime to maximize compatibility with all Network Devices.
-
The Website performance is directly related to the Disk Performance of the Database. Have you added a lot of extra resources to the Website? Do you have a lot of users with no Website Timeout configured, or a lot of concurrent users on the Website? What is the RAID Array configured on the SAN, and if there are any other…
-
As Michal mentioned, removing and rebuilding the website may resolve the issue. * Please go into Control Panel> Administrative Tools> IIS Manager. Expand Local Computer> Web Sites, then Right Click on Solarwinds NetPerfMon and select Delete.* Server 2003: In the IIS Manager, Right Click on the Local Computer, and select…
-
Josh noted earlier about DISA STIGs and our Network Configuration Manager. The Configuration Manager is great for checking your Device Configurations for meeting your Network Security Requirements. Now that you have your Configurations configured and setup, what about logging? Some areas of the Federal Sector require some…
-
Orion reports the numbers found when it queries the SNMP agent on a device. Discarded traffic, whether it is intentional or not, is recorded by the following MIBS: ifInDiscard, ifOutDiscard, ifInErrors, ifOutErrors. Since these MIBs are Counters that Increment, our application will take an Initial poll and record this…
-
Device vendor and what pollers should be used is based on the SysObjectID. The ID in the Node Details resource is reporting HP device. 1.3.6.1.4.1.9 is Cisco, .11 is HP. Rediscovery picks the vendor information up and refreshes every 30 minutes. Do you have any other same Cisco model devices reporting HP other than this…
-
The Uptime is based on the SysUptime OID 1.3.6.1.2.1.1.3.
-
There are Several Active Directory Templates that Customers have Posted on Thwack. In APM 3.1 and above, you can search through the Components in the Orion Website and view other Users have Created and further Modify their Template. I myself added aLTeReGo's Template for Active Directory since he has a great Reputation of…
-
"Object reference not set to an instance of an object" Error usually occurs in the Universal Device Poller if the poller had an issue being added. I would recommend opening a Support Case to see what is exactly causing the issue. You may need to remove and readd either the Custom Poller or the Device to clear the error.
-
The Jet Files should be from the Syslog and Trap Services. When the logs come in, they are stored in the Temp Directory with the .tmp extension until written to the database. Turn off the Syslog & Trap service and see if the number of tmp files stop.
-
Universal Device Pollers does not have If/Else Statement available. You may be able to use Enumeration, and map all numerical values to a value or status. To Modify the Poller: * Edit the Poller, and expand out Show Advanced Options. * Select Raw Value under MIB Type * Change Format to Enumeration, select Map Values. * One…
-
Most SAN Systems are pretty limited when it comes to SNMP and LUN information. Storage Manager is designed to use a SMI-S Provider to gather this information. SMI-S is a system like SNMP and is designed for SAN Systems. I would recommend that you perform a MIB Walk on the Device, but it is possible that the LUN information…
-
Those will be the components you will need to remove to remove the Kiwi Syslog Web Access completely.
-
1. You can only UnManage at the current time, or 1 time in the Future. 2. The Unmanaged Resides in the Nodes, and APM_Application Tables.
-
Here is the Link to APM for Download: Application Performance Monitor
-
1. You can configure the devices to send NetFlow back to the Main Solarwinds Server, or you can purchase Additional Pollers to collect and report the information back to SQL. You can deploy 1 Additional Poller per location, or deploy an Additional Poller to cover multiple sites. Each Polling Server can handle about 50,000…
-
The Child Status (the little yellow/red at the bottom right) of a Node is for any element When you go into the Server's Node Details page, look at the AppStack Resource to see if any Application, or related VM Host/Cluster is relaying the status. Note that Node Status Roll-up way it is designed for Orion Core 2010-2018.4…
-
The Polling Engine and the Orion Server need to be on the same version. This is more than likely the reason for this Error. You will need to get your Additional Poller to Orion 10.0 and the same Service Pack level to ensure that the Pollers can talk correctly to each other. If after you upgrade that you still have this…
-
Settings> NTA Settings> Database Settings, Retention Period. All data is stored for 30 days by default, in 1 minute increments.
-
Permission to connect is set at the Agent level. You will need to edit the Agent on the remote system to remove the prompt to allow to connect. Under the Agent Settings under Additional Settings.
-
Yes, you can use Dependencies setup so that if the Parent Device fails, the Group of devices behind are set as Unreachable. You will want to setup the Group of devices you want to show as unreachable under Settings> Manage Groups. To setup the Dependency go under Settings> Manage Dependencies.
-
On the Alert Group at the bottom, please change the selection to All of the following apply. With the current selection of Any, when the Component is Down, Unknown, or Unreachable you will receive the Alert. Another Option would be to remove the entire Alert Group at the Bottom and only explicitly set is equal to Down.…
-
SNMPv3 Traps does not exist in the Current Orion 10.1.3. You can see the Orion 10.2 beta features here: Orion 10.2 Features
-
We are only able to Poll based on IP Address or Hostname (provided that the Hostname resolves via Reverse DNS to the IP Address).
-
To loop in the thread for closure, what the error was stating was that FIPS encryption was enabled in the OS registry. FIPS requires SHA Authentication for SNMPv3 devices. FIPS enabled systems will have issues connecting to SNMPv2 and SNMPv3 MD5 systems due to the increased security on the OS.
-
You will want to go ahead an build a Custom Package to Deploy this application. The update package can handle additional files, which this application uses a 7z archive folder for installation. Deploying Custom Packages with Patch Manager
